543174
50
Zoom out
Zoom in
Vorherige Seite
1/93
Nächste Seite
EN-50
Controlling the projector through a
LAN environment
You can manage and control the projector from one or more remote comput-
ers when they are properly connected to the same local area network.
Wired connection
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of
the projector and the other end to the RJ45 port on your Ethernet or
router.
2. Press “Menu” and then go to SETUP > Network menu.
3. Highlight LAN Settings and press “Enter”.
4. Make sure the Network Status shows Connected.
5. Press to highlight DHCP and press / to select On.
6. Please wait for around 15 - 20 seconds, and then re-enter the Wired
LAN page. The IP Address, Subnet Mask, Gateway, and DNS settings
will be displayed. Note down the IP address displayed in the IP Address
row.
Important
If the Projector IP Address still does not appear, contact your network administrator.
If the RJ45 cables are not properly connected, the IP Address, Subnet Mask, Default
Gateway, and DNS settings will display 0.0.0.0. Make sure the cables are properly
connected and perform the procedures above again.
If you wish to connect to the projector in its standby mode, be sure you have selected
RJ45 and obtained the IP Address, Subnet Mask, Gateway, and DNS information when
the projector is on.
If you are in a non-DHCP environment:
1. Repeat steps 1-4 above.
2. Press
to highlight DHCP and press / to select Off.
3. Contact your ITS administrator for information on the IP Address, Subnet
Mask, Gateway, and DNS settings.
4. Press
to select the item you want to modify and press “Enter”.
Internet
IP Router
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Optoma EH501 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Optoma EH501

Optoma EH501 Bedienungsanleitung - Deutsch - 94 seiten

Optoma EH501 Bedienungsanleitung - Holländisch - 93 seiten

Optoma EH501 Bedienungsanleitung - Französisch - 92 seiten

Optoma EH501 Bedienungsanleitung - Italienisch - 92 seiten

Optoma EH501 Bedienungsanleitung - Polnisch - 92 seiten

Optoma EH501 Bedienungsanleitung - Türkisch - 92 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info