English
33
User Controls
PIP RULE TABLE
Sub source
Main source
DVI-D VGA Componet-p S-video Video
DVI-D (digital RGB / HDCP)
VGA (analog RGB)
Componet-p (480p/576p/720p/1080i)
S-video
Video
Logo
Use this function to select your desired startup screen. If you change
the setting from one to another, when you exit the OSD menu, the
new setting will take effect on next open.
Optoma: The default startup screen of Optoma projector.
User: Use memorize picture from “Logo Capture” function.
Logo Capture
Press “Enter” to immediately capture a picture what on the display
screen.
Security Settings
■ First Time:
1. Press “Enter” to set password.
2.ThePasswordis4digits,DEFAULTVALUEis“0000”.(rsttime)
3. Use
number buttons on the remote to select your password, and then
press“Enter”keytoconrmyourselection.
Security Timer: Can be select the time (month/day/hour)
function to set the number of hours the projector can be
used. Once this time has elapsed you will be requested to
enter your password again (Use number buttons on remote.
To change password, follow change password instructions
above).
Change Password:
1. Press “Enter” to input old password.
2. Use number button to enter current password, and then
press “Enter” key again to reveal next OSD menu.
3. Scroll down to highlight Password, and then press “En
-
ter” to activate.
4. Enter new password (4 digits in length) using the number
buttons on the remote, then press “Enter” to conrm.
5. Enter new password again and press “Enter” to conrm.
Security settings:
Enable: Choose “Enable” to enable security verication when
turning on the projector.
Disable: Choose “Disable” to be able to switch on the
projector without password verication.
LAN
Press “Enter” to apply LAN settings. If the connection is successful,
the OSD display will show the following dialogue box.
Network State: To display network information.
DHCP:
Enable: Assign an IP address to the projector from the DHCP
server automatically.
Disable: Assign an IP address manually.
IP Address: Select an IP address.
Subnet Mask: Select subnet mask number.
Gateway: Select the default gateway of the network connected to
the projector.
DNS: Select DNS number.
Apply: Press “Enter” to apply the selection.
Information
To display source information on the screen.
