Bedienungsanleitung Optoma ML330 (Seite 37 von 53) (Englisch)

676053

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

English

USING THE PROJECTOR

Projector OSD menu

The projector has multilingual on-screen display menus that allow you to make image adjustments and change a

variety of settings.

Menu navigation using the projector touch control panel

Note: The projector OSD menu can be opened only by pressing the

key on the remote control. Once opened,

you can use the projector touch control panel keys to navigate the OSD menu and adjust the parameters.

1. To open the OSD menu, press the

key on the remote control.

2. Tap on the projector touch control panel to activate the keys.

Note: After the activation, the touch control panel keys turn blue color. If the keys are not in use for

about 20 seconds, the touch control panel becomes inactive again.

3. When the OSD is displayed, tap the

, , , or keys to select any item in the main menu. While

making a selection on a particular item, tap the key to enter its submenu.

4. Tap the

or key to select the desired item in the submenu and then tap the key to select the

subitem. For adjusting the settings or setting the value, tap the or key. The modications are saved

automatically.

5. Select the next subitem to be adjusted in the submenu and adjust as described above.

6. Tap the

key once to return to the main menu or tap the key twice to access the Home screen.

Menu navigation using the remote control

1. To open the OSD menu, press the

key on the remote control.

2. When the OSD is displayed, press the

, , , or keys to select any item in the main menu. While

making a selection on a particular item, press the

key to enter its submenu.

3. Press the

or key to select the desired item in the submenu and then press the key to select the

subitem. For adjusting the settings or setting the value, press the or key. The modications are

saved automatically.

4. Select the next subitem to be adjusted in the submenu and adjust as described above.

5. Press the

key once to return to the main menu or press the key twice to access the Home

screen.

Menu navigation using the keyboard

Note: The projector OSD menu can be opened only by pressing the

key on the remote control. Once opened,

you can use the keyboard keys to navigate the OSD menu and adjust the parameters.

1. To open the OSD menu, press the

key on the remote control.

2. When the OSD is displayed, press the ←, →, ↑, or ↓ keys to select any item in the main menu. While

making a selection on a particular item, press the ENTER key to enter its submenu.

3. Press the ← or → key to select the desired item in the submenu and then press the ENTER key

to select the subitem. For adjusting the settings or setting the value, press the ← or → key. The

modications are saved automatically.

4. Select the next subitem to be adjusted in the submenu and adjust as described above.

5. Press the ESC key once to return to the main menu or press the ESC key twice to access the Home

screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Optoma ML330 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info