Bedienungsanleitung Optoma UHZ65 (Seite 5 von 58) (Englisch)

676014

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

English

 This projector will detect the life of the light source itself.

 When switching the projector off, please ensure the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the projector to cool down.

 Turn off and unplug the power plug from the AC outlet before cleaning the product.

 Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,

waxes or solvents to clean the unit.

 Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

 Do not setup the projector in places where it might be subjected to vibration or shock.

 Do not touch the lens with bare hands.

 Remove battery/batteries from remote control before storage. If the battery/batteries are left in the

remote for long periods, they may leak.

 Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it

can adversely affect the quality of the projector performance.

 Please follow the correct projector orientation installation as non standard installation may affect the

projector performance.

 Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.

Laser Radiation Safety Information

 This product is classied as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC60825-1 : 2014 and

also complies with 21 CFR 1040.10 and 1040.11 as a Risk Group 2, LIP (Laser Illuminated Projector)

as dened in IEC 62471:2006 except for deviations pursuant to Laser Notice No. 50, dated June 24,

2007.

Failure to comply with the following could result in death or serious injury.

 This projector has built-in Class 4 laser module. Disassembly or modication is very dangerous and

should never be attempted.

 Any operation or adjustment not specically instructed by the user’s guide creates the risk of

hazardous laser radiation exposure.

 Do not open or disassemble the projector as htis may cause damage by the exposure of laser

radiation.

 Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.

 When turning on the projector, make sure no one within projection range is looking at the lens.

 Without following the control, adjustment or operation procedure may cause damage by the exposure

of laser radiation.

 Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning

precautions to avoid possible exposure to laser.

This publication, including all photographs, illustrations and software, is protected under international copyright

without written consent of the author.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Optoma UHZ65 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Optoma UHZ65

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info