Bedienungsanleitung Optoma W400 (Seite 43 von 83) (Englisch)

700363

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

English

USING THE PROJECTOR

 Color Temperature (Data mode): Select a color temperature from Warm, Medium, or Cool.

 Color Matching: Select the following options:

± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)

level of the image.

± Hue: Adjust the color balance of red and green.

± Saturation: Adjust a video image from black and white to fully saturated color.

± Gain: Adjust the image brightness.

± Reset: Return the factory default settings for color matching.

± Exit: Exit the “Color Matching” menu.

 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an

image.

± Reset: Return the factory default settings for RGB gain/bias.

± Exit: Exit the “RGB Gain/Bias” menu.

 Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:

AUTO, RGB, or YUV.

 Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,

RGB(0-255), RGB(16-235), and YUV.

 White Level: Allow user to adjust White Level when inputting Video signals.

Note: White level can only be adjusted for Video/S-Video input sources.

 Black Level: Allow user to adjust Black Level when inputting Video signals.

Note: Black level can only be adjusted for Video/S-Video input sources.

 IRE: Allow user to adjust IRE value when inputting Video signals.

Note:

 IRE is only available with NTSC video format.

 IRE can only be adjusted for Video/S-Video input sources.

Signal

Adjust the signal options.

 Automatic: Congure automatically the signal (the frequency and phase items are grayed out). If

automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.

 Frequency: Change the display data frequency to match the frequency of your computer’s graphic

card. Use this function only if the image appears to icker vertically.

 Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be

unstable or ickers, use this function to correct it.

 H. Position: Adjust the horizontal positioning of the image.

 V. Position: Adjust the vertical positioning of the image.

Note: Signal can only be adjusted for RGB/Component input sources.

Brightness Mode (Lamp base data)

Adjust the brightness mode settings for lamp-based projectors.

 Bright: Choose “Bright” to increase the brightness.

 Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the

lamp life.

 Dynamic: Choose “Dynamic” to dim the lamp power which will be based on brightness level of the

content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will

be extended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Optoma W400 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Optoma W400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info