Bedienungsanleitung Orbis Astro Log (Seite 2 von 2) (Englisch)

625614

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ADVANCED PROGRAMMING (SPECIAL FUNCTIONS) EXTRAS

WINTER / SUMMER OFFICIAL TIME CHANGE

Enter in MENU with key OK, use keys ∆

and ∇ to select EXTRAS. Validate with

OK and display shows EXTRAS SEASON, press again OK and it is shown

SEASON:ON, with keys ∆

and ∇ it is possible to select three options: AUTO,

MANUAL and NOT USE; validate always with OK.

AUTO: (The clock is automatically changed on the last Sunday in March and the

last Sunday in October at 2:00 h and at 3:00 h respectively). This option does not

allow any change.

MANUAL: (Allows to choose the date and time for the time change). When

selecting this option display shows SEA W-S, the month and the time for Winter to

Summer change, using keys ∆

and ∇ it is possible to change the month for the

automatic change, validate with OK and change, in the same way, the day, hour

and minutes, finally validate with OK. Then it appears SEA S-W and proceed in the

same way.

DEACTIVATED (NOT USE): (No time change will be made)

If this option is selected, no automatic time change will be executed. If there is any

switching programmed at the exact time of the time change period, these will be

duplicated or not executed, depending the type of time change.

PROGRAMMING FESTIVITY PERIODS

This menu only appears if any switching has been programmed in MENU

PROGRAMMING as FESTIVITY. Only one period of FESTIVITY can be

programmed. Enter in MENU EXTRAS HOLIDAYS and display shows HOLIDAYS

NOT USE, this option allows to deactivate the holidays programm.

To enter a festivity programm, use keys ∆

and ∇ to show in display HOLIDAYS

EDIT, validate with OK and programm the BEGIN as follows: month, day, hour and

minute. Then programm END of the period of festivity in the same way.

During this period, the device will execute the switchnig programmed as festivity,

and display shows the symbol “ “.

HOLIDAY PROGRAM

Enter in MENU EXTRAS HOLIDAYS and the display shows HOLIDAYS NOT USE,

this option allows to deactivate the holidays programm. To enter a holiday

programm press ∆

and ∇ and display shows HOLIDAYS EDIT, validate with OK

and programm the BEGIN as follows: month, day, hour and minute. Then

programm END of the period of holidays in the same way.

During this period, the device will not execute any programmed switching, and

display shows the symbol “ “.

IMPORTANT: If any switching is programmed as FESTIVITY, then the

programm HOLIDAYS cannot be used and it is removed from menu

remaining as FESTIVITY period.

COUNTER

Enter in MENU EXTRAS COUNTER, then it appears COUNTER C1: and the

number of hours that circuit C1 has been activated (position ON); using keys ∆

and ∇ we can see the counter of circuit C2. Counters only increment the hours if

connected to power supply.

To reset the counters, just press OK when the display shows the counter to see

ERASE C1 or ERASE C2, and select YES with keys ∆

and ∇ and then validate

with OK.

MODE 12H – 24H.

Enter in MENU EXTRAS 12H – 24H, press OK and select the mode to display the

time. Validate with OK.

DISPLAY CONTRAST

Enter in MENU EXTRAS CONTRAST, press OK and the display shows

CONTRAST and a number from 0 to 9. Select the desired contrast level by using

keys ∆

and ∇ and validate with OK.

TECHINCAL FEATURES

Power supply As indicated on the device

Switching capacity: 16 (10) A / 250 V~

Maximum recommended loads:

Incandescent lamps: 3000 W

Uncompensated fluorescent lamps 1200 W

Compensated fluorescent lamps 1200 W 150 µF

Low voltage halogen lamps 1000 VA

Halogens (230 V) 2500 W

Low-consumption lamps 10X23 W

Contact type and material Changeover AgSnO

Power consumption: 6 VA 1 circuit (aprox. 1 W)

Action type: 1B, 1S, 1T and 1U

Memory spaces: 22

Type of switchings: ON

OFF

ASTRONOMIC

Switching accuracy: Better than 1 second

Operating accuracy: ≤ ± 1 s/ day at 23 ºC

Power reserve: 4 years (Lithium battery)

at 23 ºC

Operating temperature: - 10 ºC to + 45 ºC

Protection category: IP 20 according to EN 60529

Protection class: II according to EN 60335

when mounted as intended

Pollution situation: Normal

Sealable cover

DIMENSIONS

If you need more information regarding sunrise and sunset times, you can visit the

following websites.

Only for Spain:

http://www.mfom.es/ign/home/astronomia/publico/efemerides/salidasypuestasdesol.html

International:

www.sunrisesunset.com

www.worldtime.org

A016.26.52842

ORBIS TECNOLOGÍA ELÉCTRICA, S.A.

Lérida, 61 E-28020 MADRID

Tel.: + 34 91 567 22 77 Fax + 34 91 571 40 06

E-mail: info@orbis.es

http://www.orbis.es

88 45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Orbis Astro Log Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info