Choose,“C1” and “C2”
the DELETE option and press “Ok”
to confirm or key “
” to exit
without deletion.
On the display appear the words
followed by the channel concerned (C1 or C2) and the instrument
returns to normal operational status once again.
Note:
slightly
programme is displayed (start time).
“C2” to display all the parameters relative to that programme
until the “Ok” key is enabled which allows access to the menu
containing the options modify , delete and next (to go to the next
programme cyc
At this point using keys “C1” and “C2” choose the desired option
and press “Ok” to confirm.
3. Reset programmes
T
on the instrument:
Press key “ ” to enter the menu,
choose the PROGRAM option using keys
“C1” and “C2”and press
“Ok” to confirm.
Choose option RESET PROGRAM
using keys “C1” and “C2” and press
“Ok” to confirm.
Choose CONFIRM and press “Ok” .
cancelled.
Alternatively it is possible to reset programmes by accessing the
reset menu (see Reset menu).
➢
using keys “C1” and “C2”
➢
confirm with “Ok” .
The minimum duration value is displayed
➢
press “C2” to display the maximum
duration
➢
press “Ok” to enter into modification
➢
− hour
− hour
➢
press “Ok” to confirm
➢
the words
PROGRAMME OPTIONS Menu
This function allows programmed switchings to be impeded,
discriminating them by typology,
from memory
- )
- disable impulse programmes
- disable cyc
-
)
-
)
➢
choose SETTINGS PROGRAM using keys “C1” and “C2”
➢
confirm with “Ok”
➢
choose channel “C1” or “C2” on which to work
➢
confirm with “Ok”
➢
(enabled or not)
➢
“C1” and
“C2” and press key “Ok” to access modification of the selected
parameter
➢
“C1” and “C2” if you want to
enable or disable the switchings
➢
press “Ok” to confirm
➢
Note:
to be excluded from automatic operation.
PIN Menu
It is possible to set a protection code to stop anyone from working
on the instrument.
The pin code is a number composed of 4 digits which may assume
values from 1 to 4.
T
➢
“C1” and “C2”
➢
confirm with “Ok”
➢
(0000 corresponds to an inactive pin)
➢
confirm with “Ok”
− Ok” to insert the new pin code.
Use keys “C1” and “C2” to enter the digits composing the
code one by one and “Ok” to confirm them
−
request
➢
press “Ok” to confirm
➢
( in the case
of reset)
If the pin code request is active,
minutes after the last time the keypad is
pressed,
point pressing on the keypad again leads
to a request to enter the pin code.
T
this rule:
- key “ ” :“C1” :“C2” :“Ok” : 4
For example,“C2” “Ok” “ ” “ ”
RESET SETTINGS Menu
This option resets all settings relative to:
- date format
- automatic change DST/CET
-
- programme options
- pin code
T
➢
“C1” and “C2”
➢
confirm with “Ok”
➢
confirm again with “Ok”
1.3 CYCLE Programmes
Press key “ ” to enter the menu,
choose the PROGRAM option
using keys “C1” and “C2”
and press “Ok” to confirm.
Choose option NEW using
keys “C1” and “C2”
and press “Ok” to confirm.
Choose the channel onto which
to carry out the programming
through keys “C1” and “C2” .
Y
to carry out the programme
on channel 1
on channel 2
or both channels
simultaneously
Press “Ok” to confirm.
Choose with
keys “C1” and “C2” .
Press “Ok” to confirm.
Enter the day and time
(hours,
cyc
of the ON period
(hours,
duration of the OFF period
(hours,minutes),
and time (hours,
of cyc
will give some possible
values for the end of the event:
such values are calculated so
that the last period is always complete).
The maximum duration of a cycle is
one week.
Press “Ok” to confirm.
Once programming is confirmed,
on the display appear the words
with the channel concerned (C1 or C2).
During normal operation, the eventual
execution of a cyc on field (8)
of the display
1.4 HOLIDA
Press key “ ” to enter the menu,
choose the PROGRAM option using
keys “C1” and “C2”and press
“Ok” to confirm.
Choose option NEW
using keys “C1” and “C2”
and press “Ok” to confirm.
Choose the channel onto which t
o carry out the programming
through keys “C1” and “C2” .
Y
to carry out the programme
on channel 1
on channel 2
or both channels simultaneously
Press “Ok” to confirm.
Choose
with keys “C1” and “C2” .
Press “Ok” to confirm.
Choose one days’ holiday
or a holiday period
using keys “C2”
Press “Ok” to confirm
Insert the date (holiday day)
or the interval of holiday days
(holiday period).
Press “Ok” to confirm.
Note:
are to be considered as included
in the period.
As confirmation of programming,
on the display appear the words
with the channel concerned
(C1 or C2)
During normal operation, the eventual
execution of a holiday programme is shown
by symbol
on field (8) of the display
Note:
At this point the instrument activates the
recursive function which allows several
holiday days (or holiday periods) to the
programmed in succession.
If you do not wish to enter another days’
holiday (or period),
There is no control of the correlation between holiday events
programmed using the recursive function:
to be intended as facilitated programming.
The instrument’
4 holiday periods + 20 holiday days to be memorised.
Once maximum capacity is reached,
another programme causes the display to show the message
.
programme in the memory in order to enter a new one( in the
case of contemporary programming on two channels, at least
one position in the memory must be available for each channel).
The message is shown on the display whenever there
is an attempt to save a programme overwriting a pre-existent
programme of the same type (for example trying to enter a daily
off event at 08:00 if there is already a daily on event at the same
time).
2.
Through this menu it is possible
to display
programme saved in the instrument.
2.1 Displaying a programme
Press key “ ” to enter the menu,
and using keys “C1” and “C2”
choose the PROGRAM option.
Press “Ok” to confirm.
Using keys “C1” and “C2”
choose CHECK
Press “Ok” to confirm.
Choose the channel on which
you wish to check the programme.
Finally
type of event you wish to check
using “C1” and “C2” .
At this point the first programme pertaining to the specified type is
displayed.
scroll forwards and backwards through them by using keys “C1”
and “C2” .
If no programme of that particular type is present, on the display
appear the words .
2.2 Modifying a programme
It is possible to access programme
modification from the programme
display status.
Choose the programme to be modified
and press key “Ok”
Choose the MODIFY option using
keys “C1” and “C2” and
press “Ok” to confirm.
At this point it is possible to insert the
new programme parameters.
under modification flashes. Use keys “C1” and
“C2” to set the values and “Ok” to confirm or the
key “ ” to exit without modifications.
At the end of the modification the words are displayed with
the channel concerned (C1 or C2) and the instrument returns to the
normal operational status once again.
2.3 Deleting a programme
It is possible to access programme
deletion from the programme
display status.
Choose the programme to be deleted
and press key “Ok”
C1 C2
R
Ok
C1 C2
R
Ok
SETTINGS MENU
This menu allows the instrument’
to be displayed and eventually modified.
These are:
casual programme option and pin.
From the normal operational status
➢
press key “ ”
➢
keys “C1” and “C2”
➢
press “Ok” to confirm.
LANGUAGE Menu
➢
using keys “C1” and “C2”
➢
confirm with “Ok”
➢
displayed:“Ok”
to access the modification
➢
using keys “C1” and “C2”
➢
confirm again with “Ok”
➢
The options are:
Italian,
DA
➢
using keys “C1” and “C2”
➢
confirm with “Ok”
➢
press “Ok” to access the modification
➢
using keys “C1” and “C2”
(dd-mm-yy or yy-mm-dd)
➢
confirm with “Ok”
➢
using keys “C1” and “C2”
➢
press “Ok” again to confirm
➢
TIME Menu
➢
“C1” and “C2”
➢
confirm with “Ok”
C1 C2
R
Ok
C1
C1
C2
C2
C1
C1
C2
C2
C1
C2
C1 C2
R
Ok
C1
C2
➢
“Ok” to access the
modification
➢
“C1” and “C2”
➢
press “Ok” again to confirm
➢
CHANGE CET/DST Menu
DST/CET management can be carried out automatically by the
device.
T
➢
“C1” and “C2”
➢
confirm with “Ok”.
AUTO OFF)
➢
press “Ok” to enter modification
➢
using keys “C1” and “C2” choose whether to activa
deactivate the function
➢
press “Ok” to confirm
If you choose ,
otherwise the instrument remains within the menu to allow the time
change days to be set.
T
in which CET/DST time
change occurs:
➢
using keys “C1” and “C2”
➢
confirm with “Ok” .
The words AUTO ON
appear on the display
(should this not happen,
see previous paragraph
“Enable automatic time change”)
➢
press key “C2” .
The time change
parameters from CET to DST
appear on the display
➢
“Ok” it is possible to modify such values.
The parameters to be entered are sequentially:
· week
· month
· day (or date)
· time
-
second 2ND,
LAST last (meant for example
as the last Sunday
...of the month) or DA
a precise date)
shows that the time change happens
on the last (LAST) Sunday (7)
of March (03) at 2 (02:00)
- month of change
-
of the month is requested; in the other
cases you are asked to enter the
day of the week on which the time
change is to happen
Press “Ok” to confirm
-
Press “Ok” to confirm
- “C2”
it is possible to set the moment
in which the time change
from CET to DST occurs
in the same way
When all the parameters have been set,
press “
Depending on the date, on the instrument
display appears the symbol during
the CET period (winter) and the symbol
during the DST period (summer).
CASUAL P
This menu allows the modification of the
minimum and maximum time which passes
between two switchings when a casual
programme is activated.
values are set at 1 and 5 minutes.
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
C1 C2
R
Ok
➢
The factory values are reloaded thus:
Date format dd--mm--yy
Change DST/CET
- change summer time
- change winter time
automatic
Last Sunday of March at 02:00
Last Sunday of October 03:00
Casual programme
- minimum period
- maximum period
1 minute
5 minutes
Request PIN 0000 - disactivated
METER MENU
The instrument
calculated on a certain channel.
The counter
once the maximum limit is reached.
T
- press key “ ” to enter the menu
- “C1” and “C2” and press
“Ok” para confirmar
- “C1” y “C2” la salida en cuestión y
pulse “Ok” to confirm.
The total
- “Ok” you access the
possibility to reset the meter:
press “Ok” to confirm or
“
” to exit without resetting.
Note:
reset an individual meter which is not possible if the meter is reset from
the “reset
RESET MENU
It is possible to restore the initial status of the instrument using the
reset function.
- reset settings:
- reset programmes:
- reset meter:
- reset all:
T
- press key “
” to enter the menu
- choose RESET using keys “C1” and “C2” and press “Ok”
- “C1” and “C2” choose on of the resets listed above
and press “Ok”
- Ok” to confirm
T
to factory conditions, you need to use a pointed object to press
key “R” .
the initial conditions restored.
BA
When the battery charge level drops belo
the first line of the display appear the words . In this case
replace the battery as soon as possible.
T
- disconnect the mains
-
-
- connect the power supply
In order not to lose programming and the performed settings it
is necessary to make sure that no more than 60 seconds pass
between extracting the flat batter
Only use CR-2032 type batteries.
Dispose of the used batteries observing the
laws in force in relation to the disposal of
hazardous waste
REFERENCE ST
Compliance with Community Directives
2006/95/CE (Low V
2004/108/CE (E.M.C.)
is declared in reference to the harmonized Standards:
• EN 60730-2-7
