Bedienungsanleitung Orbis DATA ASTRO (Seite 4 von 4) (Englisch, Spanisch)

612913

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

ALTERNATING CIRCUITS: ( )

Two operating modes are possible: FIXED and ALTERNATING.

With the cursor indicating “ ”, the message “AL” (Alternating) or “FI” (Fixed) is

on the display, depending on whether the alternating or fixed mode is configured.

Use keys 1X or 10X to change the mode. When the switch is turned to fixed mode,

it works normally, whereas in alternating mode each day the manoeuvres of the

astronomic and programmable circuit are switched (the luminaries consequently

have a homogeneous ageing).

PROGRAMMING HOLIDAY EVE: “V Holiday”

This function is used to turn off the programmable circuit at different times on

certain days of the year, for example on Fridays, Saturdays, Sundays, eves of

holidays and holidays, in respect of the other days.

With the program cursor indicating “V holidays”, the message “WE” (Weekend) is

displayed . Using keys 1X or 10X you can select We on or WE off.

WE on: the special switching off of the programmable circuit is made on Friday

night and on Saturday night.

WE off: It does not make any special switching off during the weekend.

Then press INTRO and the message “HOLI” (holiday) will appear, selecting HOLI

on or HOLI off with keys 1X or 10X.

HOLI on: The special switch-off of the programmable circuit will be made on the

holiday eve night, and besides, if WE is activated “on” (Friday and Saturday nights),

then the switch-off will also be made on Sunday night.

HOLI off: The special switch-off of the programmable circuit will be made on

holiday eve.

Then press INTRO and introduce the switch-off time of the special days with keys

1X, 10x and INTRO.

If you want to keep the programmable circuit switched on all the night during these

special days, press CLEAR and --:-- will appear on the display.

If you do not want to switch on the programmable circuit on those special days,

program 13:00 as time for disconnection.

By pressing INTRO, the digits will flash.

After programming the switch-off time, the date digits will flash. With keys 1X, 10X

and INTRO we will program holiday eves (day/month/--) up to a maximum of 31.

WARNING: HOLIDAY EVES

ARE PROGRAMMED, NOT HOLIDAYS!

Example: For the early morning of the 24

to 25

December to be considered a

holiday eve, 24

December must be programmed.

PASSWORD. DATA PROTECTION

Password is a security system to avoid unauthorised adjustment in DATA ASTRO.

With the cursor in “Auto” program, password is activated initially by using keys

CLEAR and then INTRO. Using keys 1X, 10X and INTRO can program the

password. Once it is introduced, it will be stored by pressing key .

If the password is activated and if any key is pressed, --:-- will be shown on the

display, indicating us that we must introduce the password. Pressing key ”Y”

will be shown on the top left corner of the display indicating it is correct. After

having introduced the password and if any key is pressed, the switch returns to

“Auto” in 40-50 seconds. If password is not correct an “N” appears and you should

try again; pressing key you have access to the programmed data allowing us

to modify them.

PASSWORD OF ACTIVATION OR MODIFICATION.

Once the correct password has been introduced and if “Y” is on the display,

password can be cancelled pressing “CLEAR” or it can be modified with key 1X

and 10X. The new password can be accepted or cancelled by pressing key .

OVERRIDE

Switching on and off can be made manually. With the cursor in “Auto” we can

change the position of the contact by pressing key 10X for astronomic circuit and

key 1X for programmable circuit. These switchings are nor permanent, that is to

say, circuits recover their normal position with subsequent programming or by

means of the “CLEAR” key.

Flashing the “Auto” program cursor indicates override. If the password was

activated, no manual switching can be made until the password is introduced.

TECHNICAL DATA

Supply: According to characteristics label

+10% –15%

Breaking capacity 10 (2) A/250 V ∼

Recommended maximum charges

Incandescent lamps 2000 W

Non compensated fluorescents 500 W

Compensated fluorescents Unsuitable

Low tension halogens 1500 VA

Halogens (230 V) 2000 W

Low consumption lamps Unsuitable

Own consumption: 5 VA

Switching accuracy: Better than 1 second

Accuracy: Better than 1 sec./ day between

20 ºC and 30 ºC

Standby 30 days

Operating Temperature: -10 ºC to +45 ºC

Type of protection: IP 20 according to EN 60529

Class of protection: II according to EN 60335 in correct

mounting conditions.

DIMENSIONS:

This unit incorporates a battery which contents can be harmful to the enviroment.

Please do not throw it away without removing the battery and putting it in the

proper container for recycled batteries or to send the complete unit back to the

factory.

Julio 2003

A016.2JULIO6.51296

ORBIS TECNOLOGÍA ELÉCTRICA S.A.

Lérida, 61 Tel.: + 34 91 567 22 77

E-28020 MADRID Fax + 34 91 571 40 06

E-mail: info@orbis.es

http://www.orbis.es

107

65,5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Orbis DATA ASTRO Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info