Bedienungsanleitung Oregon Scientific BAR936HG (Seite 9 von 15) (Englisch)

589371

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ACTIVATE ALARM

Navigate to the Clock Area, then press ALARM /

switch to Daily Alarm or Pre-Alarm view. To activate or

deactivate the alarm, press UP or DOWN.

When the alarm time is reached, the backlight will be on

for 5 seconds and crescendo alarm will sound for

2 minutes. Press any key (except snooze) to silence

the alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE / LIGHT to temporarily disable the alarm

for 8 minutes.

, or

will blink while Snooze is

on.

BAROMETER

This product tracks fluctuations in barometric pressure

to provide the weather forecast, and the current and past

24 hours barometric pressure history measurements are

recorded by the main (indoor) unit.

VIEW BAROMETER AREA

Press SELECT to navigate to the Barometer Area.

is NOT shown, press MODE.

SELECT MEASUREMENT UNIT

Slide the mb / inHg switch (in the battery compartment),

to change the display unit.

VIEW BAROMETER HISTORY

To view the last 24 hours barometric history, navigate to

the Barometer Area. Then press HISTORY repeatedly

to scroll through the measurements. The number shown

in the HR box indicates how long ago each measurement

was taken (e.g. 2 hours ago, 3 hours ago, e.t.c.).

SET ALTITUDE

Set the altitude to match how far above or below sea

level you are living. This ensures that the barometric

pressure readings are accurate.

1. Navigate to the Barometer Area.

2. Press and hold HISTORY for 2 seconds.

3. Press UP or DOWN to set the altitude in 10-metre

increments (-100m to 2500m).

4. Press HISTORY to confirm.

ICON DESCRIPTION

Clear

Partly cloudy

Cloudy

Rainy

Snowy

Day / Night

The night time icon displays from 6 PM to 6 AM.

When the Channel 1 sensor records a temperature of

2°C (35.6°F) or lower, the RAINY icon becomes SNOWY.

UV MEASUREMENT

The UVR138 Ultra-Violet Radiation Sensor is included

with the BAR986HG and is available as an optional item

for the BAR933HG. The UV sensor gives you the

following information at your fingertips:

• 10-hour Ultra-Violet Index (UVI) record.

• Automatic calculation of acceptable UV exposure

times based on pre-set user profiles (4 users

maximum).

• UVI Danger Alert when UV Index reaches unsafe levels.

UV data is shown in the same area as the Barometer.

Press SELECT to navigate to the Barometer Area, then

press MODE to display the

UV icon

and data.

Refer to the UVR138 User Manual for more

information and see below to learn about the new

additional UV features.

NOTE

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather

within a 30-50 km (19-31 mile) radius. The forecast is

based on barometric pressure trend readings.

The top area shows an animated icon indicating the

forecasted weather.

WEATHER FORECAST ICONS

BAR933HG Eng R4 7/26/04, 9:26 PM8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific BAR936HG Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific BAR936HG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info