NOTE The indoor memory record will be cleared
simultaneously
I
If the channel 1 sensor falls between 3°C to -2°C (37°F
to
is approaching freezing.
NOTE The alarm will automatically stop if the
temperature goes outside the ice-warning range.
RADIO
Y to stations for AM
for FM).
T
:
Press RADIO .
T
:
1. Press
RADIO to turn the radio ON.
2. Press
AM / FM to select radio frequency
3. Press TUNNING / SET
/ to manually fine
tune the or press hold TUNNING
SET / to activate auto-search.
4. Press and hold ST
to save the station.
SLEEP TIMER
T:
1. Press
SLEEP once to activate the last setting
used.
2. Press SLEEP to set
90, 30, 0 “0” disable
the sleep timer
3. Press VOLUME / to change the volume.
NOTE “SLEEP” flashes when the sleep timer is
activated.
BACKLIGHT
Press any key to activate the backlight for 1 minute.
RESET
Press RESET to return the main unit to the default
settings. Remove and then re-insert the batteries to
reset the sensor
PRECAUTIONS
This product is engineered to give you years of
satisfactory
a few precautions:
•
Do not use a damp cloth to clean the surface of
the light
cloth to clean the unit, turn the power off before
cleaning.
•
Placement of this product on wood surfaces with
certain types
result
manufacturer instructions for direction as
to the types of wood surface. Oregon Scientific
shall not be responsible for any damage to wood
surfaces from contact with this product.
•
Do
over it, dry it immediately with a soft, lint-free cloth.
•
Do not clean the unit with abrasive or corrosive
materials.
•
Do not the unit excessive force,
dust, humidity may in
malfunction, shorter life damaged
battery and distorted parts.
•
Do
Doing so will
may cause
no user-serviceable parts.
•
Only fresh as the
instructions. Do not mix new and old batteries.
•
Do not use rechargeable batteries.
•
Remove batteries when storing the product for a
long time.
•
Do
waste. Collection of such waste separately for
special treatment is necessary
•
Due to printing limitations, the displays shown in
this manual may differ from the actual display
•
The contents
without the permission of the manufacturer
NOTE The
the
without notice.
SPECIFICA
TYPE DESCRIPTION
Main unit
Dimensions 163 x 65.4 x 96 mm
(L (6.4 x 2.6 x 3.8 inches)
Weight 300g (10.6 ounces)
T
Indoor range -5°C to 50°C (23°F to 122°F)
Outdoor range -30°C to 60°C (-22°F to 140°F)
Resolution 0.17°C (0.2°F)
Radio clock
Synchronization Auto or disabled
Clock display HH:MM
Hour format 12hr
Calendar DD/MM or MM/DD
Weekday in 5 (E, G, F
languages
Alarm 2-minute beep or radio alarm with
8-minute snooze
PLL FM /
channels
Sleep 120, 90, 60, 30 and 0 mins
Remote unit (THN132N)
Dimensions 92 x 22 x 50 mm
(L (3.6 x 0.9 x 2.0 inches)
Weight 46 g (1.62 lbs) without battery
RF frequency 433MHz
Range Up to 30 meters (100 feet) with no
obstructions
T Approx. every 40 seconds
Channel no. 1, 2 or 3
Power
Main unit 6V adapter
Remote unit 1 x UM-3 (AA) 1.5V battery
NOTE
the
in temperatures below freezing.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to
learn more about Oregon Scientific products such as
digital cameras; MP3 players; children’s electronic
learning products
and fitness gear; weather stations; and digital and
conference phones.
The website also contact information for our
Customer
us, as
downloads.
need
would like to contact the Oregon Scientific Customer
Care department directly
www2.oregonscientific.com/service/default.asp OR call
1-800-853-8883.
www2.oregonscientific.com/about/international.asp
FCC ST
This device complies with 15 of the FCC Rules.
Operation is subject
This device may not cause harmful interference, and
(2) This
including interference that may cause undesired
operation.
W Changes or modifications not expressly
approved by
void the user
NOTE This equipment has been tested and found
to comply with the limits a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are
harmful interference in a residential installation.
This
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to communications. However there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio / TV
technician for help.
D
The
for sales. customer
number (listed
com), or the warranty card this product) for
inquiries instead.
We
Name: Oregon Scientific, Inc.
Address: 19861 SW 95th
Oregon 97062 USA
T 1-800-853-8883
declare that the product
Product No.: BARM699A
Product Name: Wireless Thermometer with
Self-Setting Clock and FM
Radio
Manufacturer: IDT
Address: Block C, 9/F
Phase 1,41 Man Y
Hom, Kowloon, Hong Kong
is in conformity with Part 15 of the FCC Rules.
Operation
This
device
interference that may cause undesired operation.
© 2006 Oregon Scientific.
086L004256-013
BARM699A_EN_R5.indd 2 2/17/06 2:05:00 PM
