Bedienungsanleitung Oregon Scientific ds 6868 (Seite 8 von 8) (Englisch)

289010

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

ENGLISH

FRENCH

GERMAN

ITALIAN

SPANISH

ENGLISH

FRENCH

GERMAN

ITALIAN

SPANISH

PORTUGUESE

14 15

Note:

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This product generates, uses and radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in particular installation.

If this product does cause harmful interference to radio or television reception, which can be determined

by turning the product off and on, the user is encouraged to correct the interference by one or more of the

following measures:

• Increase the separation between the product and the affected equipment.

• Consult the dealer or an experienced radio/television technician for assistance.

Note:

During file transfer or in the Web Camera mode, if the camera or computer is suddenly froze or no response,

it may be due to the electrostatic phenomenon, please follow the procedures below to recover the operation:

• Unplug the USB cable from the camera

• Close the software application in the computer (or re-boot the computer if necessary)

• Re-connect the USB cable to the camera.

Important: Shielded cables must be used with this product to ensure compliance with the Class B FCC limits.

Taking Care of Your Camera

With careful treatment you will have many years of fun with your DShot I digital camera:

1. Do not immerse the camera in water. Water will damage the electronic components.

2. Do not bang or drop the camera as this may damage the electronic components.

3. Do not clean the camera with household cleaners or chemicals.

4. To clean the camera casing, carefully wipe the casing with a clean soft cloth that has been slightly

dampened with water.

5. To clean the lens, gently blow on the lens to remove dust and dirt, then wipe the lens with a camera lens

cleaning tissue.

6. Turn the camera off when not in use.

7. When battery power is exhausted, replace the old batteries with new batteries. Do not mix old batteries

with new batteries.

8. Only insert the batteries in the polarity direction as shown in block 1, above.

9. Do not put anything into the battery compartment except batteries.

10. Batteries contain dangerous chemicals and if mistreated or improperly disposed of can cause harm,

injury or damage.

11. Do not open the camera casing or tamper with the camera’s electronic components; doing so will void

the camera’s warranty.

Specifications

Image Sensor: 1.3Mega-pixel CMOS

Photo Resolution: 1280 x 1024 (Super-fine or Fine quality)

640 x 512 (Basic quality)

Focus range: 1m to infinity (Scene mode)

Approx. 26cm (Close-up mode)

Internal Memory: 2M-byte (non-volatile Flash memory)

External Memory: Compact Flash Type I (not included)

Flashlight range: 2 meter

Self Timer: 10 seconds

Movie Camera Mode: 10 frame per second at 160 x 120 resolution

Web Camera Mode: 15 frame per second at 160 x 120 resolution

Computer Interface: USB

Video Output System: NTSC or PAL

Power: 2 x AA-size 1.5V alkaline batteries, or

5V 200mA power supply (not included)

Battery Life: Approx. 100 shots (without flashlight)

Automatic Off: 60 seconds (default)

Temperature: 32°F – 104°F (0°C – 40°C)

Storage: -4°F – 140°F (-20°C – 60°C)

Weight: 190g (including batteries)

Dimensions: 85mm (w) x 98mm (h) x 39mm (t)

Accessories: Software CD-ROM (for PC and MAC)

2 x AA-size 1.5V alkaline batteries

Hand strap

Instruction manual

Quick start guide

USB cable

Video cable

Note: All company and/or product names are trademarks and/or registered trademarks of their respective

holders.

* The product might not function properly in case of electrostatic discharge. In that case, resetting

is required to bring it back to normal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific ds 6868 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific ds 6868

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info