Bedienungsanleitung Oregon Scientific DS8118 (Seite 6 von 20) (Englisch)

589219

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ESPAÑOL

ENGLISH

FRANÇAIS

DEUTSCH

PORTUGUÊS

DS8118 Manual-6 Lang. (086-002937-017)

PORTUGUÊS

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

ESPAÑOL

ATTACHING THE STRAP AND LENS CAP

SECURE DIGITAL (SD) AND MULTI-MEDIA CARD (MMC)

The Secure Digital (SD) and Multi-Media Card (MMC) are external memory cards

that can be plugged into your Digital Camera to extend the memory capacity. Please

refer to (

p.29) for the list of memory cards compatible with this digital camera.

When an external card is installed,

will be displayed on the Status LCD.

It is recommended that all memory cards are formatted using the Format

option (

p.15) before using them with this digital camera. Memory cards

formatted using other devices may be incompatible.

When the SD card is installed, all images and movies taken are automatically

stored on the card. Images and movies in the internal memory cannot be

accessed until the card is removed.

The SD card will not insert fully into the slot if it is facing the wrong way. Be

careful not to apply undue force to the card.

Attaching the Strap Attaching the Lens Cap

1. Pass the short,

thin loop of the

strap through

the camera’s

strap hole.

2. Pass the

other end of

the strap through.

3. Tighten by

pulling the loop.

1. Pull the lens

cap cord through

the camera’s

strap hole.

2. Pass the lens

cap through the

loop.

3.Tighten by

pulling.

4. Fit the lens cap

onto the lens.

Removing Secure Digital /

Multi-Media Card

Installing Secure Digital /

Multi-Media Card

6 7

1. Turn off the

camera.

2. Open the

battery door.

3. Insert the card

following the

printed remark.

4. Close the

battery door.

1. Turn off the

camera.

2. Open the

battery door.

3. Press the

card to release.

4. Close the

battery door.

BASIC PHOTOGRAPH

QUICK START

1. Frame your subject in the viewfinder. The frame in the middle of the viewfinder

indicates the zone of automatic focusing. You can also view the subject on the

OSD (

p.8).

2. Press the Shutter Release Button.

3. The image taken is displayed on the OSD for approximately a second (Auto

Review).

4. Once the Auto Review has finished, you may proceed to take the next picture.

When memory is full, no more images can be stored. The camera will

beep and the words “Internal Memory Full” will appear on the LCD if

you press the Shutter Release Button.

When you have finished taking your pictures:

1. Turn to Mode Dial to Off.

2. Place the lens cover securely over the lens.

1. Remove the

lens cover from

the lens.

2. Turn the Mode

Dial to Camera

Mode.

3. Check the

battery indicator,

making sure

there is enough

power ( p.4).

1. Loop the strap

over your wrist.

2. Hold the camera

firmly.

3. Avoid blocking

the lens and flash.

4. Do not move nor

remain in motion

while taking

pictures. Use a

tripod if necessary

( p.26).

Preparing the camera

Holding the camera

Taking Basic Pictures

Shutting Off the Camera

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific DS8118 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific DS8118

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info