Bedienungsanleitung Oregon Scientific DS8228 (Seite 8 von 19) (Englisch)

589220

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

ESPAÑOL

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

PORTUGUÊS

DS8228 Manual-Eng (086-002861-054)

PORTUGUÊS

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

Focus Options Table

Icon Mode Description

Scene This mode is used when the subject is far. The camera will focus on the

subject in the viewfinder's frame when the Shutter Release Button is

pressed halfway. Range: 60cm to ∞.

Macro This mode is used when the subject is near. Range: approx.

18cm to 60cm.

To toggle between Flash Modes, press the

button on the camera and observe the Flash

Icon on the LCD Display. The Flash Lamp on the camera lights up when flash is enabled,

signalling that the flash is ready for use. When a picture with flash is taken, the Flash Lamp

will blink for a second to recharge. Once it lights up, flash can be used again.

Toggling Between Flash Modes

Flash Mode Options Table

Icon Function Description

Auto The flash may discharge automatically, depending on the light

conditions.

Flash Off The flash will not discharge.

Auto + Red This mode reduces "red eye" caused by the flashlight reflecting in

Eye Reduction the subject's eyes. The flash may discharge, depending on the light

condition.

Flash On + This mode reduces "red eye" caused by the flashlight reflecting in

Red Eye the subject's eyes. The flash discharges automatically, regardless of

Reduction lighting condition.

Icon Function Description

Flash On The flash discharges regardless of lighting condition

Slow This mode uses a slow shutter speed in combination with flash. The

Synchronous fired flash freezes the subject in the foreground while capturing the

Flash background scene.

In and modes, there will be a brief initial flash before the main flash is

emitted. This is done to reduce the "red eye" effect in images.

Your digital camera comes with a 2X zooming function. By default, the zooming is not enabled.

1. In Camera, Scene, or Movie mode, enable zooming by pressing

on the 4-Way

Controller (

p.4).

2. A Digital Zoom Icon,

, appears on the OSD to indicate that the 2X zoom is in effect.

3. To cancel the 2X zoom, press

on the 4-Way Controller ( p.4). The camera then

returns to normal shooting range.

The Shutter Release button has two different functions:

Action Function Description

Pressed Lock Subject Focus, exposure, an white balance of the scene within

Halfway within Viewfinder the viewfinder is locked. If the subject is in focus, the

green status LED lights up.

Pressed Take picture The scene within the viewfinder is taken and stored in

Fully memory. If the scene has not been locked, the image

taken may be blurry.

The Self-Timer function counts down before the camera automatically takes a picture by

itself. This is useful when you want to be in the picture, and there is no one else to press the

Shutter Release Button.

1. Turn the Mode Dial to Camera or Scene Modes.

2. Press

on the 4-Way Controller. The Self-Timer will engage.

PRESS PRESS PRESS PRESS PRESS

PRESS

Continued:

Selecting a Flash Mode

Zooming

Using the Shutter Release

Using the Self-Timer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific DS8228 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific DS8228

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info