Bedienungsanleitung Oregon Scientific HMS388 (Seite 16 von 19) (Englisch)

589248

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

If an RDS station is tuned, the VFD will read the station name (PS) approx. 3 seconds after the radio frequency is automatically

displayed. During that time, press the display / RDS button on the remote control continually and the VFD will read the following

services: Programme Type (PTY)----Frequency----Station Name (PS).

RDS is available only for the Europe. When using the unit in North America or other markets that do not support RDS,

the RDS feature will not work if the remote control display / RDS button is pressed; the message, "NO RDS", will show on the

VFD.

TROUBLESHOOTING

Use this troubleshooting guide to help remedy any difficulties you may be experiencing while using the CD Micro System.

Should any problem persist after you have checked these symptoms, consult your nearest Oregon Scientific dealer.

Why is there no power coming from the unit? And when there is power why is it switching off automatically?

Ensure the AC power cord is connected to wall outlet and all cables and speaker cable wires are properly connected. If the

player is not used, i.e., no button is pressed for 30 minutes, it automatically switches to standby mode (Auto Power Off). Press

the button to switch the player on again. The plugs and jacks may be dirty, affecting the connections. Ensure the cables and

plugs are cleaned and properly connected and firmly established.

Why is the unit not playing CDs?

The disc may not be secured in place. Take the disc out and re-insert if necessary. If the disc is dirty, clean it with a soft, lint-free

cloth and try playing the disc again. If it still does not play, than may mean it is scratched or is not of the format that is compatible

with the player. There may be excess moisture condensed inside the player's lens. Leave the player turned off for a few hours

until moisture evaporates, then turn on.

How come the buttons on the main unit and / or remote control do not activate the functions they control?

The player may not be operating properly due to lightning, interference, static electricity or some other external factors. Turn the

unit off, disconnect the power plug and then re-connect. Try changing the battery cell on the remote control. Your unit has built-

in protection against overload or overheating. If the unit switches off in this case, wait a few minutes and power on again. If the

buttons on the unit and remote control still do not activate the functions they control even when corrective actions are taken, the

buttons may be damaged or there may be some other cause of malfunction. Take the unit to a qualified Oregon Scientific dealer

for servicing.

Why do the speakers and subwoofer not power on at all?

Ensure the power cord is firmly plugged into the power outlet. On rare occasions, the speakers may not operate due to data

signal interference or static electricity. Turn the power off and unplug the unit from the power outlet briefly, and then plug it in

again so it will reset itself and turn the speaker on.

How come there is hardly any sound or no sound coming from one or any speakers or subwoofer at all?

Check to ensure the power is on and increase the volume. Make sure the speakers are connected properly and that the unit is

not on mute. Check to see that the light / dark grey speaker and subwoofer cable wires are matching their appropriate light / dark

grey terminals. Data signal interference or static electricity may disrupt the signal reception. Switch the unit off, wait a few

seconds, and turn the unit back on. The speaker cable wires may be twisted or tangled up in knots, causing interference or

disruptions / distortion to audio reception. Untangle or untwist the cable wires should allow for clearer audio reception.

How do I eliminate the severe hum, distortion or noise that is coming from the speakers and subwoofer?

The cables and jacks may be dirty, affecting the connections and thus causing sound distortion. Wipe clean. In some cases,

volume might not be appropriately adjusted. Adjusting the volume will help to clear any hum or distortion. There may be excess

moisture condensed inside the speakers or that might affect their ability to produce audio, especially after turning on heating in

the room, if the room is damp, or if the speakers are brought directly from a cold to a warm place. In this case, leave the system

off for a few hours until moisture evaporates, unplug the AC power cord and then plug it in again.

NOTE

+06(QJ5B1RYB 11/10/2005, 08:13 PM15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific HMS388 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific HMS388

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info