Bedienungsanleitung Oregon Scientific IB368 (Seite 3 von 19) (Englisch)

589257

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

REPLACEMENT PARTS

When parts need replacing, ensure the authorized

service center uses parts specified by the manufacturer

or parts that have the same characteristics as the original

parts. Unauthorized substitutes may result in fire, electric

shock or other hazards.

SAFETY CHECK

After repairs or service, ask the authorized service center

to perform safety checks to confirm that the unit is in

proper working condition (if you have the product

serviced, remember to bring the entire system so the

authorized service center may have access to all the

necessary components in the system).

WALL MOUNTING

The product should be mounted to a wall only as

recommended by Oregon Scientific.

MAINTENANCE

 Do not subject the product to extreme impact, shock

or fluctuations in humidity.

 Do not make any changes or modifications to the

product. Unauthorized changes may void your right

to use the product and invalidate the warranty.

 Do not tamper with internal components or attempt

to service the product yourself. If any electronic

circuitry is exposed, do not, under any

circumstances, touch the circuitry as there is a

danger of electric shock.

 The unit should not be exposed to dripping or

splashing and no objects filled with liquids, such as

vases, should be placed on the unit.

 Do not scratch hard objects against the LCD as the

surface can be easily damaged. Take special care

when handling a damaged LCD, as the liquid crystals

can be harmful to your health.

 Do not use or store the unit in locations that may

adversely affect the product such as rain, snow,

moisture, dust or desert. Keep your player in a dry,

well-ventilated place to prevent it from molding.

 Do not place this unit in direct sunlight for long

periods. This may deform or discolour the cabinet

and may cause malfunction.

 Keep this unit away from strong magnetic fields.

Exposure to magnetic fields may cause a loss to the

wireless signal reception or even damage the unit's

internal circuitry.

 Stains on the unit should be wiped off with a soft,

lint-free cloth. If the unit is heavily stained, wipe it

with a cloth soaked in water-diluted neutral detergent

and wrung well, then wipe clean. Remember to

unplug the unit from the wall outlet before cleaning.

 Never use alcohol, solvent, aerosol cleaners,

chemical, paint thinner or benzene to clean the unit.

 The speaker grill requires no special care, although

you may pull the grill out from the unit and clean or

vacuum the individual grill holes carefully if

necessary.

 The temperature around the center unit must be

between 5˚C and 35˚C (41˚F and 95˚F). Operating

the unit in temperatures outside this range will

increase the risk of damage and malfunction.

OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to

the product, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges. Article

810 of the National Electrical Code, ANSI / NFPA 70,

provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements

for the grounding electrode.

LIGHTNING

For added protection for the system during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and

disconnect any cables. This will prevent damage to the

system due to lightning and power-line surges.

POWER LINES

An outside antenna system should not be located near

any overhead power lines or other electric light or power

circuits, or when it can fall into such power lines or

circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching

such power lines or circuits as contact with them might

be fatal.

OVERLOADING

Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of

fire or electric shock.

OBJECT AND LIQUID ENTRY

Never push objects of any kind into this product through

the openings as they may touch dangerous voltage

points or short-out parts that could result in fire or electric

shock. Never spill liquid of any kind on the product.

DAMAGE REQUIRING SERVICE

Do no attempt to service this product yourself as opening

or removing covers may expose you to dangerous

voltage or other hazards. Unplug the system from the

wall outlet and refer servicing to qualified service

personnel under the following conditions:

 When the power-supply cord, plug or cables have

been damaged.

 If liquid has been spilled, or objects have fallen into

the product.

 If the system has been exposed to rain or water.

 If the system does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its

normal operation.

 If the system has been dropped or damaged in any

way.

 When the product exhibits a distinct change in

performance - this indicates a need for service.

EU_IB368manual(eng)R12 8/31/2005, 3:48 PM2

Oregon Scientific IB368 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific IB368

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info