Bedienungsanleitung Oregon Scientific IB368 (Seite 12 von 19) (Englisch)

589257

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

2. Press the button once to exit.

NOTE “Auto quit” activates when idle for more than 10

seconds.

SETTING THE CLOCK

NOTE The clock can only be adjusted by minute

increments and not by hour increments, and when the

system is powered off.

1. Ensure the speaker is powered off. Press the

button. Both hands on the clock will flash and the

display’s blue backlight turns on.

2. Use the / buttons to set the time: press the

button once to advance the clock by 1 minute

and press the button to turn the clock back by

1 minute. Press and hold the / buttons down

to set the time faster.

3. Press the button to confirm the newly set time

and exit the clock setting mode. The backlight

turns off.

NOTE No other buttons can be pressed while the setting

clock function is on. “Auto quit” activates when the

function is idle for more than 10 seconds; the last time

that was set prior to idling is not saved.

NOTE The clock will show on the LCD regardless of

whether your wireless speaker is powered on or off.

SYNCHRONIZING WITH THE COMPUTER

Once the iPod is docked into the transmitter dock, the

iPod synchronizes with a computer and music (and

photos with iPod with color display) files can be

transferred from computer to the iPod.

1. Power off the iBall speaker.

2. Plug one end of the Apple iPod Dock Connector

cable that is supplied with the iPod to the transmitter

dock’s 30-pin jack and the other end (Firewire or

USB connector) to the computer. The iPod

synchronizes with your computer. Use Apple

iTunes® or other software on your computer to

transfer music files to the iPod.

3. After file transfer is complete, unplug the Dock

Connector cable from the iPod and press any button

on the iPod to turn on the unit.

4. Operate the iPod and iBall speaker as normal.

MUTE

TIP If you increase (or decrease) the volume while the

speaker is on mute, the Mute function will deactivate

and audio playback can be heard again.

BASS AND TREBLE

Adjusting the wireless speaker’s bass and treble settings

allows the device to playback audio with a different range

of sound and tonal effects.

ADJUSTING BASS

1. Press the button once during playback or when

speaker is on idle or pause. appears on the

LCD.

2. Use the / buttons to increase or decrease the

bass. To continuously increase or decrease the

bass, press and hold the / button down until

the desired bass level is reached. The volume / bass

and treble bar decreases or increases accordingly.

3. Press the button again. appears on the LCD.

ADJUSTING TREBLE

1. Use the / buttons to increase or decrease the

treble. To continuously increase or decrease the

treble, press and hold the / button down until

the desired treble level is reached.

To decrease volume, press

the button once. To

continuously decrease

volume, press and hold the

button down until the

desired volume level is

reached.

1. To mute the sound of

the wireless speaker

during playback,press

the button.

appears on the LCD.

2. To deactivate the mute

function, press the

button again.

reappears.

EU_IB368manual(eng)R12 8/31/2005, 3:51 PM11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific IB368 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific IB368

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info