Bedienungsanleitung Oregon Scientific IWA-80055 (Seite 1 von 2) (Englisch)

796467

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

TRANSMITTER:

1. LED indicator:

- Flashes when the remote unit transmits a reading.

2. CHANNEL SLIDE SWITCH:

- Assign the transmitter to Channel 1, 2 or 3.

(NOTE: The default and only effective channel

for receiver is Channel 1.)

3. RESET:

- Press it to restart the transmitter.

4. BATTERY COMPARTMENT:

- Requires 2 AA size batteries (not included).

5. BATTERY DOOR:

6. WALL-MOUNTING HOLDER:

- Supports the transmitter in the wall mounting.

7. TABLE STAND:

- Use it to support the the sensor on a flat surface.

BEFORE USING THE TRANSMITTER

1. Remove the transmitter from the stand and

open the battery door.

2. Insert 2 AA size batteries into the battery

compartment. Make sure you insert them the

right way according to the polarity information

marked on the battery compartment.

3. Replace the battery door.

4. “Channel 1” must be selected for this model.

NOTE:

Avoid placing the transmitter in direct sunlight, rain or

snow.

WEATHER STATION

1. Remove the battery door and insert 3 AA size

batteries into the battery compartment. Make

sure you insert them the right way according to

the polarity information marked on the battery

compartment.

2. Replace the battery door.

3. Press “RESET” key to restart the clock and it

will synchronize with the transmitter

automatically.

NOTE:

1. The building material and the position of receiver

and transmitter affect the effective range. So

try various locations to obtain the best result.

2. Place the unit away from metal objects and

electrical appliances to minimize the interference.

Position the receiver and transmitter within the

effective transmission range: 100 feet in usual

circumstances.

TIME AND CALENDAR SETTING

1. In normal time mode, press and hold “MODE”

key for 2 seconds until the HOUR digit flashes.

2. Press “ADJ · °C/°F” key to change its value.

3. Repeat the above operations to set time and

calendar in this order: Hour > Minute > Second >

12/24 Hr > Year > Month > Date.

4. Press “MODE” key to save and exit the setting

mode, or let it exit automatically 30 seconds

later without pressing any key.

ALARM TIME SETTING

1. In normal time mode, press “MODE” key to

enter the alarm time mode.

2. Press and hold “MODE” key for 2 seconds to

enter the alarm time setting mode until the

HOUR digit flashes.

3. Press “ADJ · °C/°F” key to change its value.

4. Repeat the above operations to set the alarm

Minute.

WIRELESS THERMO CLOCK

MODEL IWA-80055

USER’S INSTRUCTIONS

Thank you for your purchase of this wireless

thermo clock. The utmost care has gone into the design

and manufacture of your clock. Please read the

instructions carefully and keep the manual for future

reference.

The receiver unit has a clear, easy-to-read display that

shows the indoor/outdoor temperature, time, date, month

and day of the week . It is able to receive and display

readings from the remote sensor.

The 433 MHz technology means no wire installation is

required and you can place the sensor anywhere you

like.

MAIN FEATURES:

1. SNOOZE / LIGHT:

- Press it to turn on the backlight for 5 seconds.

- Press it to stop the current alarm when it is

sounding.

2. LCD display:

- Displays the time, date, month, day of the week,

indoor/outdoor current temperature as well as the

maximum and minimum indoor/outdoor

temperature.

3. ALM ON/OFF:

- Press it once to turn on the Alarm and Snooze;

press it twice to turn on the Temperature Alarm;

press it again to turn off all of them.

- Press it to stop the current alarm when it is

sounding.

4. MODE:

- Press it to switch between normal time mode and

alarm time mode.

- Press and hold it for 2 seconds to enter the time

setting mode.

- In setting mode, press it to step the setting items.

5. ADJ · °C/°F:

- Press it to switch between Celsius and Fahrenheit.

- In setting mode, press it to change the setting

values.

6. MAX / MIN:

- Press it to check the minimum and maximum

temperature records.

- Press and hold it for 3 seconds to delete the

maximum and minimum temperature records.

7. RESET:

- Press it to reset all values to default values.

- In case of malfunction, the unit may be required

to reset.

8. BATTERY COMPARTMENT:

- Accommodates 3 AA size batteries.

9. FIXED TABLE STAND:

- Use it to stand the clock on the desktop.

S N O O Z E / L I G H T

C/ F

RESET

MOD EL NO : IWA -800 55

MA DE I N CHI NA

Rem ote Ther mo Cl ock

IWA-80055

Alarm/

OFF

Temperature

Alarm/Snooze

Alarm and Snooze ON

Temperature Alarm ON

C8257-PD08423M Size: A4

5. Press “MODE” key to save and exit the setting

mode, or let it exit automatically 30 seconds

later without pressing any key.

NOTE:

The alarm will be automatically turned on when you set

the alarm time.

USING ALARM & TEMPERATURE ALARM

FUNCTIONS

1. Set the alarm time as described in the previous

section.

2. Press “ALM ON/OFF” key once to turn on the

alarm and snooze with the bell icon “ ” and

snooze icon “Zz” displayed on the LCD.

3. Press it twice to turn on the temperature alarm with

the icon “ ” displayed.

4. Press it again to turn off all of them until the

icons disappear.

NOTE:

1. To activate the temperature alarm function,

ALARM must be on.

2. The temperature alarm can be turned on 30

minutes earlier than the alarm only when the

transmitter’s temperature is below -3°C (26°F).

3. Once the snooze function is turned on, the 4-

step crescendo alarm will sound 7 times in 5-

minute interval. The alarm duration is 60 seconds.

4. Enter the snooze mode; press the “ALM ON/OFF”

key to stop the alarm completely and exit the snooze

mode.”

HOW TO READ INDOOR AND OUTDOOR

TEMPERATURE RECORDS

Change the temperature unit to °C for Celsius or °F

for Fahrenheit by pressing the “ADJ · °C/°F” key.

NOTE:

1. If no signals are received or the transmission is

interfered, “---” will appear on the LCD.

2. Relocate the clock or the transmitter in other

positions and make sure the transmission is within

the effective range of 100 feet approx.

3. After several unsuccessful attempts to receive the

temperature signal, please remove the batteries

from the sensor and main display unit and start

the setup procedure again and decrease the

distance between the sensor and main display unit.”

CHECKING AND DELETING MAX. /MIN.

TEMPERATURE RECORDS

1. Press “MAX/MIN” key once to check the

maximum temperature records. Press it twice

to check the minimum records. Press it again to

exit.

2. Press and hold “MAX/MIN” key for 3 seconds to

delete the maximum and minimum temperature

records.

LOW BATTERY INDICATOR

When the LCD becomes dim, replace with 3 AA size

batteries at once; while if the low battery indicator

“ ” appears on the LCD, it indicates that the

battery power of the transmitter is not enough, and

you should replace the batteries at once.

MAX.temperature record

MIN.temperature record

Oregon Scientific IWA-80055 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info