299964
33
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
EN
28
You may need to change the dial type setting to Pulse dialling if your
local phone exchange does not support Tone dialling.
“My call was cut off when I went out of range of the base unit. Now
I cannot use my handset.”
Please move the handset closer to the base unit.
“I hear a tone while I am using my handset, and the battery symbol
on the display is “empty.”
The battery needs to be recharged. Put the handset into the charger; it
will take up to 15 hours to be fully charged.
“I’ve tried recharging the batteries, but I still get a warning that it is
not charged.”
The batteries probably need to be replaced.
“The handset does not ring when a call comes in.”
Check that you have not set the ringing volume to “Off” (see section
Setting the Ring Tone Volume).
“The Caller Display function is not working.”
Please check if you have subscribed to the Caller Display service with
your network provider.
“The Caller Display function is working but the Caller’s Name from
the phonebook is not displayed even if the same phone number
calls in.”
You need to store the full phone number including the STD code into
your phonebook memory.
“I have tried several times to press
but I cannot make a call.”
Your phone may not be registered. See section Registering Handset
to Base Unit.
“The Within Range Symbol is flashing on the handset display.”
Due to radio interference in the environment, occasional loss of
synchronization between the handset and base unit may have occurred
for a very short period. The base unit will quickly change to another
channel automatically to overcome the interference and restore the
synchronization. You can also move the handset near the base unit to
reduce the interference.
manual-E.p65 2004/10/25, PM 06:4933
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific ls328 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oregon Scientific ls328

Oregon Scientific ls328 Bedienungsanleitung - Holländisch - 36 seiten

Oregon Scientific ls328 Bedienungsanleitung - Französisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info