Bedienungsanleitung Oregon Scientific RMR383HGA (Seite 2 von 2) (Englisch)

796533

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

NOTE The language options are English (E), German (D),

French (F), Italian (I), and Spanish (S).

To switch the clock display:

Press MODE to toggle between:

• Clock with day

• Clock with seconds

ALARM

To set the alarm:

1. Press and hold ALARM for 2 seconds.

2. Press / to set alarm time.

3. Press MODE/SNOOZE to conrm. indicates alarm is

ON.

To enable / disable the alarm:

1. Press ALARM to display alarm time.

2. Press ALARM again to turn alarm ON / OFF.

To silence the alarm:

• Press SNOOZE to silence it for 8 minutes.

• Press any key except SNOOZE to turn the alarm off and

activate it again after 24 hours.

TEMPERATURE AND HUMIDITY

To toggle temperature unit:

Press °C / °F.

To view outdoor sensors temperature readings:

Press CHANNEL.

To auto-scan between sensors:

Press and hold CHANNEL for 2 seconds. Each sensor’s data

is displayed for 3 seconds.

To end auto-scan:

Press CHANNEL or MEM.

To toggle between current, minimum and maximum

records for the selected sensor:

Press MEM repeatedly.

To clear the records:

Press and hold MEM for 2 seconds.

TEMPERATURE AND HUMIDITY TREND

The temperature and humidity trend icons are based on

recent readings.

RISING STEADY FALLING

ICE WARNING

If the channel 1 sensor falls between 3°C to –2°C (37°F

to 28°F), ashes to warn you that the temperature is

approaching freezing.

NOTE The warning will automatically stop if the temperature

goes outside the ice-warning range.

HI / LO TEMPERATURE / HUMIDITY ALARM

An alarm can be set to sound if sensor set to channel 1

records above or below a temperature / humidity of your

choice.

To set alarm ON/OFF:

1. Press and hold TEMP / HUMIDITY HI / LO .

2. Use and to select high / low temperature / humidity

alarm. Press TEMP / HUMIDITY HI / LO to conrm.

3. Press / to set alarm ON / OFF and press TEMP /

HUMIDITY HI / LO to conrm.

4. If alarm has been activated, use and to select the

temperature / humidity.

5. Press TEMP / HUMIDITY HI / LO to conrm.

To silence the alarm:

Press any key. The alarm resets automatically and will

resound if the hi / lo temperature selected is recorded

again.

NOTE The THN132N sensor supplied does not support

humidity readings. To enable Hi / Lo Humidity alarm a

thermo-hygro sensor must be purchased and set to channel

1. For further information on compatible sensors such as the

THGR268 thermo-hygro sensor please check with your local

retailer or go to www2.oregonscientic.com.

HEAT INDEX

The heat index combines temperature and humidity data to

describe the actual temperature felt. The THN132N sensor

supplied does not support heat index display. A thermo-hygro

sensor must be purchased to enable heat index display for

channels 1-3.

WARNING HEAT INDEX MEANING

Extreme danger 54.5°C (130°F) Strong risk of

or above dehydration / sun

stroke

Danger 40.5 - 54°C Heat exhaustion

(105 - 129°F) likely

Extremecaution 32.2 - 40°C Possibility of heat

(90 - 104°F) dehydration

Caution 26.6-31.7°C Possibility of heat

(80- 89°F) exhaustion

• To display the heat index, press HEAT INDEX.

• To toggle between current / maximum / minimum

readings, press HEAT INDEX, then press CHANNEL to

select channel 1-3 or indoor, followed by MEM.

• To toggle between temperature / humidity and heat index

display, press and hold HEAT INDEX for 2 seconds.

Press HEAT INDEX again to stop this feature.

NOTE If the heat index is below 80°F / 26°C, if the selected

sensor does not support humidity measurement or if the

channel is not working, the heat index will display NA .

COMFORT ZONE

The comfort zone assesses the climate based on current

temperature and humidity measurements.

ICON TEMPERATURE HUMIDITY

Any > 70%

20 - 25°C (68 - 77°F) 40 - 70%

Any < 40%

MOON PHASE

• When calendar is set press or to view the moon

phase for the next / previous day.

• Press and hold or to scan through the years (2001

to 2099).

New Moon

Waxing Crescent

First quarter

Waxing Gibbous

Full Moon

Waning Gibbous

Last quarter

Waning Crescent

RESET

Press RESET to return to the default settings.

PRECAUTIONS

This product is engineered to give you years of satisfactory

service if you handle it carefully. Here are a few

precautions:

• Do not subject the unit to excessive force, shock, dust,

temperature or humidity, which may result in malfunction,

shorter electronic life span, damaged battery and

distorted parts.

• Do not immerse the unit in water. If you spill liquid over

it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not tamper with the unit’s internal components.

Doing so will invalidate the warranty on the unit and

may cause unnecessary damage. The unit contains no

user-serviceable parts.

• Only use fresh batteries as specified in the user’s

instructions. Do not mix new and old batteries.

• Due to printing limitations, the displays shown in this

manual may differ from the actual display.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose this product as unsorted municipal waste.

Collection of such waste separately for special treatment

is necessary.

NOTE The technical specications for this product and the

contents of the user manual are subject to change without

notice.

SPECIFICATIONS

TYPE DESCRIPTION

MAIN UNIT

L x W x H 110 x 69 x 140 mm

(4.3 x 2.7 x 5.5 in)

Weight 153 g (5.34 oz) without battery

Temperature unit °C / °F

Temperature range -5°C to 50°C (23°F to 122°F)

Resolution 0.1°C (0.2°F)

Clock frequency WWVB-60

Synchronization Auto or disabled

Signal frequency 433 MHz

Clock Auto or manual (disabled)

Humidity range 25% - 95%

Humidity resolution 1%

MEM Min / Max relative humidity and

temperature

Alarm duration 2 minutes

Snooze 8 minutes

Clock display HH:MM:SS

HH:MM:Day of Week

Hour format 12 / 24 hour format

Calendar MM / DD or DD / MM language

selectable: E, D, F, I and S

Power 2 x UM-3 (AA) 1.5 V batteries

REMOTE UNIT

L x W x H 96 x 50 x 22 mm

(3.8 x 2.0 x 0.9 in)

Weight 62 g (2.22 oz) without battery

Transmission range 30 m (100 ft) unobstructed

Temperature range -30°C to 60°C (-22°F to 140°F)

Power 1 x UM-3 (AA) 1.5 V battery

NOTE It is recommended that you use alkaline batteries

with this product for longer performance.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientic.com) to learn more

about Oregon Scientic products such as digital cameras;

MP3 players; children’s electronic learning products and

games; projection clocks; health and tness gear; weather

stations; and digital and conference phones. The website

also includes contact information for our Customer Care

department in case you need to reach us, as well as frequently

asked questions and customer downloads.

We hope you will nd all the information you need on our

website, however if you’re in the US and would like to contact

the Oregon Scientic Customer Care department directly,

please visit:

www2.oregonscientic.com/service/default.asp

Call 1-800-853-8883.

For international inquiries, please visit:

www2.oregonscientic.com/about/international.asp

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

WARNING Changes or modications not expressly approved

by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician

for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for

support or sales. Please call our customer service number

(listed on our website at www.oregonscientic.com), or on the

warranty card for this product) for all inquiries instead.

Name: Oregon Scientic, Inc.

Address: 19861 SW 95th Ave.,Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: RMR383HGA

Product Name: Wireless Indoor / Outdoor Thermometer

with Indoor Humidity and Self-Setting

Atomic Clock

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St.,

ung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: 1) This device may

not cause harmful interference. 2) This device must accept

any interference received, including interference that may

cause undesired operation.

086L004390-014

RMR383HGA_M_R6 2006.4.7, 10:19 AM2

Oregon Scientific RMR383HGA Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info