Bedienungsanleitung Oregon Scientific RTGR328N (Seite 3 von 4) (Englisch)

589156

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

10. Once the batteries are in place, the

sensor will transmit signals every 1

minute. The readings shown on the main

unit depend on which remote sensor

(1,2,3,4 or 5) is selected. Refer to the

Main Unit user manual for more

information.

CLOCK

This remote unit can automatically

synchronize the date and time with official

time-keeping organizations in Frankfurt

(Germany) and Rugby (England). When the

unit is within 1500 km (932 miles) of a RF

signal, the reception icon will blink during

reception.

SET RADIO SIGNAL FORMAT

The RADIO SIGNAL FORMAT switch is

located inside the battery compartment.

Select EU (DCF) or UK (MSF). Press RESET.

Reception takes 2 – 10 minutes to complete.

Once complete, the icon will stop blinking.

Strong signal Weak signal No signal

For best results, place it away from

metallic or electrical objects, and in a location

with a clear view to the sky.

Press SEARCH to manually activate search

for radio-controlled clock signal. The tower

icon will blink until the clock signal is found or

the search period times out.

CHANGE CHANNEL

Repeat the Set Up procedure. In Step 3,

select a different channel number.

LOW BATTERY WARNING

The low battery indicator is shown on the main

unit when the battery is low for the selected

remote unit. Replace the batteries whenever

the low battery signal shows.

Do not use rechargeable batteries.

Properly dispose used batteries by taking

them to an authorized disposal station.

RESET SYSTEM

The RESET button is located in the battery

compartment. Press it whenever you change

the batteries, or whenever performance is not

behaving as expected (e.g., unable to

establish radio frequency link with main unit).

Refer to the User Manual for the main unit for

more information.

SAFETY AND CARE

Wash the unit with a slightly damp cloth and

mild detergent. Avoid dropping the unit or

placing it in a high-traffic location.

Do not expose the unit to direct sunlight since

this may affect the accuracy of

measurements.

WARNINGS

This product is designed to give you years of

service if handled properly. Observe the

following guidelines:

• Never immerse the unit in water. This

can cause electrical shock and damage

the unit.

• Do not subject the main unit to extreme

force, shock, or fluctuations in

temperature or humidity.

• Do not tamper with the internal

components.

• Do not mix new and old batteries or

batteries of different types. Do not use

rechargeable batteries with this product.

• Remove the batteries if storing this

product for a long period of time.

• Do not scratch the LCD display.

• Do not make any changes or

modifications to this product.

Unauthorized changes may void your

right to use the product.

• The contents of this user manual are

subject to change without notice.

• Images not drawn to scale.

TROUBLESHOOTING

Check here before contacting our customer

service department.

Problem Symptom Remedy

Temp Main unit

shows “LLL”

or “HHH”

Temperature is

out of range.

Remote

unit

Cannot Check batteries

(à)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific RTGR328N Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific RTGR328N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info