13
EN
Baby Monitor
Set the unit to baby monitor mode as follows and place next to the baby.
The radio will not receive any signal but only transmit so that it will not
disturb the baby.
1. Toggle the menu key until the LCD displays
.
2. Press / key to select sensitivity level from OF (off), 1(low),
2(medium), 3(high).
3. Place the radio with microphone facing upwards within 1 meter from
the baby.
4. Press the PTTkeytoconrmthenquitthecurrentdisplay.
Please turn off the baby monitor function if you want to resume
the reception function.
Scanning Channels
1. Press the scan key and the LCD displays . The radio
automatically starts scanning channels.
2. The radio scans all frequencies one by one and will stay on the
occupied channel around 8 seconds and it will continue scanning (, or
you can press / key to manually continue scanning).
3. After scanning the occupied channel, you can press the PTT key to
talk and the radio will stay on this channel.
4. If there is no signal, it will continue scanning. Press the PTT key,
and it stays on the current selected channel and quits the scanning
function.
Press and hold the scan key for more than 2 seconds; it
enters into monitor function and receives the squelch noise and
open (un�squelch) the frequency. Release the key to end the
monitor function.
