301031
36
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
36
4.5 Indoor temperature sensor in the base unit
The indoor temperature shows on the third line of the LCD display. icon on the
left, represents the temperature on the built-in sensor, and also shows the local
humidity reading on the right of the
icon .
4.6 Remote temperature and humidity alarm setting
The remote temperature and humidity alarms are only linked to the remote sensor on
Channel 1. There is no alarm option available on Channel 2, 3 or built-in sensors.
Temperature and humidity alarm setting
1. Press [ HI/LO ] at the back of main unit (please refer to section 1.5 Installation
- Connecting the base unit) to enter the remote temperature and humidity alarm
setting mode.
2. The sequence of pressing [ HI/LO ] key for alarm setting is: High Temperature
Alarm, High Humidity Alarm, Low Temperature Alarm and Low Humidity Alarm
as follows
3. Press [
] at the back of the main unit to increment the setting values by 1
C
or 1.8
F and 1 % of humidity, or press and hold [
] at the back of the unit for
speed setting values by 5
C and 5% of the humidity.
4. The alarm will be enabled after setting the values of each item.
5. Pressing [ ON/OFF ALARM ] key at the back of the main unit to toggle between
enable/disable for each item.
6. During the temperature and humidity alarm, sound is emitted. Press the
[ CHANNEL ] to stop the alarm .
To remove the temperature and humidity alarm setting
1. Press [ HI/LO ] to select the value you want to remove
2. Press [ ON/OFF ALARM ] to remove the information
3. Press [ CHANNEL ] to confirm and return to standby mode
The remote temperature and humidity alarm will be emitted when the values of the
remote sensor in channel 1 received are out of range. The value will flash with “HI”
or
“LO” to indicate which alarm setting has been reached and beeping tone will last for
1 minute.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific wd 338 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oregon Scientific wd 338

Oregon Scientific wd 338 Bedienungsanleitung - Deutsch - 46 seiten

Oregon Scientific wd 338 Kurzanleitung - Englisch - 1 seiten

Oregon Scientific wd 338 Bedienungsanleitung - Holländisch - 46 seiten

Oregon Scientific wd 338 Bedienungsanleitung - Französisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info