Bedienungsanleitung Oregon Scientific WMR100 (Seite 7 von 16) (Englisch)

587084

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

In additi

, the

UNIT

and

buttons

located at the bottom of

the base station allows

pre-setting of the remote

sensor channels and the

measurement units for

display.

TIP

To e

xit

from the setting mode, push any button.

Alternatively, the base station will automatically exit after

30 seconds.

CLOCK RECEPTION

This product is designed to synchronize its calendar

clock automatically once it is brought within range of a

radio signal:

WMR100:

•

DCF-7

7 generated from Frankfurt, Germany for

Central Europe

• MSF-60 generated from Rugby, England

The radio signal range is 1500 km (932 miles).

WMR100

• WWVB-60 generated from the atomic clock in Fort

Collins, Colorado

The r

adio signal range is 3219 km (2000 miles).

WMR100 only - slide the

EU / UK

switch to the appropriate

setting based on your location. Press

RESET

whenever

you change the selected setting.

The rec

eption icon will blink when it is searching for a

signal. If the radio signal is weak it can take up to 24

hours to get a valid signal reception.

dicat

es the status of the clock reception signal.

ON MEANING

Time is synchronized.

Receiving signal is strong

not synchronized.

Receiving signal is weak

enable (and force a signal search) / disable the

clock radio reception (clock synchronization):

1. Press

SELECT

to navigate to the Clock / Calendar /

Alarm Area.

will show next to the Area.

2. Press and hold

appears when it is enabled.

NOTE

For best reception, the base station should be

placed on a ﬂ at, non-metallic surface near a window

in an upper ﬂ oor of your home. The antenna should

be placed away from electrical appliances and not be

moved around when searching for a signal.

SET UP BASE STATION

NOTE

Install batteries in the remote sensor before the

base station matching the polarities (+ and -).

For c

ontinuous use, please install the AC adapter. The

batteries are for back-up use only.

NOTE

Please make sure the socket-outlet is installed

near the equipment and is easily accessible.

Install the base station batteries (4 x UM-3 / AA)

matching the polarity + and -. Press

RESET

after each

battery change.

NOTE

Do not use rechargeable batteries. It is

recommended that you use alkaline batteries with this

product for longer performance.

The battery icon

indicator may

appear in the

following areas:

BASE STATION

CHANGE DISPLAY / SETTING

To change the display and settings, use the following

buttons on the rotating dial:

SELECT

MEMORY /

To change the display and settings, use the following

ON/OFF

MODE

and

ALARM

ARE

Weather Forecast

Area

Temperature / Heat

Index / Wind Chill

Area

eed

Wind

rect

ion Area

UVI

arometer /

Rainfall Area

MEANIN

Battery in the base station is low.

will

show when AC adapter is

disconnected.

The

disp

layed channel indicates

the outdoor sensor for which

battery is low.

Batte

ry in the wind sensor is low.

att

y in the UV / Rain sensor

is low.

WMR100_EN_86L4515-017.indd 7 6/15/06 4:26:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific WMR100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific WMR100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info