Bedienungsanleitung Oregon Scientific WMR300 (Seite 12 von 131) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

677397

Zoom out

Zoom in

Vorherige Seite

1/131

Nächste Seite

• Touch anywhere on the screen (except tool bar / area) to conﬁrm

and exit.

To enable / disable alarms:

1. Press desired area to activate.

2. Press to display set HI / LO alarm.

3. Press to turn alarm on or off.

NOTE

- - indicates alarm is not set / disabled.

NOTE

Clock alarm sound is different from weather alarms to allow for easy

differentiation by user.

To silence any alarm:

• Press anywhere on the touch panel.

• The alarm automatically turns off after 2 minutes.

NOTE

When alarm is on, the channel of triggered alarm will be ﬂashed and alarm

sound lasts for 2 minutes.

BACKLIGHT

Press anywhere on the touch panel to activate the backlight for 8 seconds.

If the main unit is powered by power adapter, switch the LIGHT to ON in the main

unit compartment. The light will be on until you switch it OFF.

NOTE

You need to take off the battery compartment cover to do switching.

RESET

Main unit:

Press RESET to return to the default settings.

NOTE

You need to take off the battery compartment

cover to do switching.

Transmitter box:

Press RESET to remove the record of the calibrated

wind direction.

MAINTAINANCE

Each sensor of this kit has a durable plastic casing that should retain its luster for

many years. It is better to do regular maintenance to keep the sensors with high

accuracy every half year. Do cleaning the casing only with a soft cloth slightly

dampened with water or a mild soap. Please use screw drivers or wrench to take

some parts off if necessary.

Electrical storms can sometimes cause power surges harmful to electronic

equipment. For your own safety, take caution when using the main unit or doing

maintenance during storms.

TO MAINTAIN THE THERMO/HYGRO SENSOR

1. Remove the rain collector from the rain gauge.

Unscrew the three type B screws from the rain gauge.

3. Unscrew the three screws from the bottom of

the thermo/hygro sensor casing.

4. Clean the casing excluding the one with sensor

by water, and then remove the dust around the

sensor carefully.

5. Install all the parts until they are entirely dried.

NOTE

If the temperature and humidity readings are

still strange and inaccurate, you need to consider

replacing this sensor, please contacting our customer service for the details.

TROUBLE SHOOTING

Problem Symptom Remedy

Barometer Strange readings Check altitude setting on the main unit.

Wind sensor No updates of the

wind direction

Check the wind vane.

Display dashes on

main unit

1. Check the connections.

2. Check the channel setting.

3. Check the pairing successful or not.

Rain sensor No readings 1. Check the cable tie on the tipping

bucket to be cut away or not.

2. Check the balance indicator.

3. Check the plastic ﬁlter in rain collector.

4. Check the connections.

Strange readings 1. Check the plastic ﬁlter in the rain collector.

2. Check the balance indicator.

Temp/hygro

sensor

Display dashes 1. Check the connections.

2. Check the pairing.

3. Check the channel setting.

No outdoor temp/

hygro readings

1. Check the rechargeable battery in

transmitter box.

2. Check the power adapter connection

and main unit batteries status.

3. Do maintenance for the sensor.

Calendar Strange date /

month

1. Change language.

2. Check the calendar setting.

Clock Cannot adjust

clock

Disable radio-controlled clock.

Cannot

auto-synchronize

1. Check batteries status.

2. Reset the main unit.

3. Manually activate radio controlled clock.

Sunrise/

Sunset

Strange readings 1. Set longitude/latitude.

2. Check the daylight saving time setting.

Transmitter

box

LED light(s) do not

ﬂash

1. Check the switch.

2. Check the polarity of the

rechargeable battery.

3. Check the connection of the solar panel.

Sensors

pairing

Time is too long 1. Adjust the antennas to be parallel.

2. Reset the pairing switch (switch off

then on again).

PRECAUTIONS

• Do not subject the unit to excessive force, shock, dust, temperature or humidity.

• Do not cover the ventilation holes with any items such as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid over it, dry it immediately

with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive materials.

• Do not tamper with the unit’s internal components. This invalidates the warranty.

• Only use fresh batteries. Do not mix new and old batteries.

• Images shown in this manual may differ from the actual display.

•

When disposing of this product, ensure it is collected separately for special treatment.

• Placement of this product on certain types of wood may result in damage to its

ﬁnish for which Oregon Scientiﬁc will not be responsible. Consult the furniture

manufacturer’s care instructions for information.

• The contents of this manual may not be reproduced without the permission of

the manufacturer.

• Do not dispose old batteries as unsorted municipal waste. Collection of such

waste separately for special treatment is necessary.

• Please note that some units are equipped with a battery safety strip. Remove

the strip from the battery compartment before ﬁrst use.

NOTE

The technical speciﬁcations for this product and the contents of the user

manual are subject to change without notice.

RESET KEY

Oregon Scientific WMR300 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oregon Scientific WMR300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info