796944
15
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
EN
14
blanks [----].
To disable alarm (1 or 2):
Press MODE to enter alarm-1 or alarm-2 display
followed by or .
NOTE When an alarm is activated, the alarm time
will be displayed in the alarm display. In the Clock-
Display mode, the respective alarm-on icon will appear
indicating that alarm1, 2 (or both) is set.
ENABLING AN ALARM
When disabled, the respective alarm icon will not be
displayed. The display will show blanks [----].
To enable alarm (1 or 2):
Press MODE to enter alarm 1 or alarm 2 display followed
by or .The respective alarm-on icon will appear
and the [----] alarm time will be replaced with the alarm
time set.
HOW TO STOP AN ALARM
An alarm can be disabled but remain set so that it will
activate at the same time the following day.
To stop an alarm:
When the Alarm sound is activating, press any button
(except ). The alarm will be stopped and
will activate again at the same time the next day.
SNOOZE
When either alarm 1 or 2 sounds, pressing
will stop the alarm for 8 minutes before
it sounds again.
BACKLIGHT
The EL back light casts a blue light evenly across
the LCD making information easy to read in low light
conditions. To activate the backlight, press
Snooze / Backlight.
KEY LOCK
To activate / deactivate key lock:
Press CHANNEL then press .
EMERGENCY ALERT SYSTEM (EAS)
The Emergency Alert System (EAS) uses the latest
technology to allow local authorities to broadcast
important emergency information to specific areas.
The Emergency Alert system was originally designed
as a communications link between the President and
the general public during times of emergency. The
EAS communication link is instant and can target the
State, National, and Local Area levels. The EAS and
NWS share the same digital signal used on the National
Oceanic and Atmospheric Administration’s Weather
Radio (NWR). Ultimately, the purpose of EAS is to
deliver emergency alert information to those who need
it.
P/N:086L006071-016 REV1
Page 15 of 22
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oregon Scientific WR110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info