Bedienungsanleitung Oregon Scientific WS902 (Seite 5 von 51) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

587139

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

ADJUST VOLUME

ALARM

4. While continuously pressing on UNLOCK COVER

tab, place right hand around the side of the product.

Push in the side of the cover (area above tab and hook)

and lift up to release cover.

(Left handed individuals can use right thumb and left

hand if more comfortable).

UNLOCK COVER

5. Unscrew old light bulb.

6. Screw in new light bulb.

7. Holding cover, with the top part at a slight angle away

from you, align the 2 front plastic tabs to the allotted

space.

8. Tilt cover down and towards you until lamp cover

clicks back into place.

NOTE This unit uses 60 W light bulbs. The built-in

protection feature will automatically shut down the unit

when the temperature inside the lamp cover is too high.

Remove the power plug from the socket, and only plug in

again after unit has cooled down sufficiently.

IMPORTANT Please allow this unit to cool until the

temperature inside is within a safe range.

CONNECT TO POWER SOURCE

Memory backup:

1. Remove the battery compartment cover.

2. Insert the batteries (2xAAA), matching the polarities.

3. Replace the battery compartment cover.

NOTE Batteries should not be exposed to excessive

heat such as sunshine or fire.

Before selecting a location to place the unit, consider the

following:

• Ensure there is approximately 15 cm between unit and

closest object, such as walls or other objects.

• Ensure there is at least 40 cm space above the top of

the unit for ventilation purposes.

• Ensure distance between unit location and wall socket

is not longer than the power cord itself.

Batteries serve as a back-up power supply. To fully utilize

all features, plug into wall socket.

To completely disconnect from power, the unit should be

disconnected from the wall socket.

NOTE The main unit should not be exposed to wet

conditions. No objects filled with liquid, such as vases,

should be placed on the main unit.

CLOCK

MANUALLY SET CLOCK

1. Press SET CLOCK to enter setting mode.

2. Press + or - to change the settings or press and hold

+ / – to rapidly change the settings.

3. Press SET CLOCK to confirm and move to next

setting.

The settings order is: 12/24 hr format, time.

RADIO

To activate / deactivate radio:

• Press RADIO to turn radio on / off.

To set radio station:

1. Press RADIO to turn radio on.

2. Press and hold RADIO TUNE to auto search or

press RADIO TUNE to manually select frequency.

For your convenience, the volume and radio frequency will

be stored in memory for the next time radio is turned on.

SOOTHING NATURE SOUNDS

NOTE Deactivate radio first. RADIO OFF will be

displayed on screen.

To activate / deactivate soothing sounds:

1. Press NATURE SOUND to play sounds.

2. Press NATURE SOUND repeatedly to select desired

sound (1-4) or to turn sound off.

To adjust volume:

• Press + / – when radio or nature sound is turned on.

TIP Press and hold + / – to rapidly adjust volume.

To set the alarm:

1. Press SET ALARM to enter setting mode.

2. Press + / - to change the settings or press and hold +

/ – to rapidly change the settings.

3. Press SET ALARM to confirm and move to next

setting.

4. Repeat steps 2-3 for all setting options.

The settings order is: time, alarm sound (select from beep

/ radio / bird sound).

NOTE If radio alarm is selected, radio will play for 60

minutes at set alarm time at maximum volume level.

If bird sound alarm is selected, bird sound will gradually

increase in volume to maximum and play for 2 minutes at

set alarm time .

To activate / deactivate alarm:

• Press ALARM.

-:- - indicates alarm function has been disabled.

To silence the alarm:

• Wave your hand up to 8 cm (3 inches) in front of the

SNOOZE SENSOR to silence it for 8 minutes ( / /

/ will continue flashing to indicate snooze function has

been activated)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oregon Scientific WS902 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info