HOW TO USE
Time setting:
1. Under normal mode, press SET for 3 seconds to time setting, the digits setted
is blinking. Setting sequence: 12/24 hour formathourminuteexit.
2. Press SET to confirm and advance to another setting. Press UP once and
ahead, press for 3 seconds, go ahead at an 8 step per second speed. Press
DOWN once and back, press for 3 seconds, go back at an 8 step per second
speed.
3. Without any effect handling more than 8 seconds, it returns from setting
automatically.
Note: The default is 24 hour format.
Alarm setting:
1. Press SET to switch alarm and time display.
2. Under alarm mode, press SET for 3 seconds to alarm setting, the digits setted
is blinking.
3. Setting sequence: hourminuteexitnormal mode
4. Press SET to confirm and advance to another setting.
5. Enter alarm setting mode, alarm will auto ON after setting finished. Press SNZ
for 3 seconds to turn on/off alarm.
Snooze function
When the alarm ring, press SNZ to stop the alarm and turn on snooze function, alarm
will start again after 8 minutes; Or press any other key to stop the alarm, no more
alarm in the same day.
Temperature:
1. Put the wire outside to receive the outdoor temperature.
2. Under normal mode, press UP to switch temperature: MAX valueMIN
valuecurrent value.
3. Press UP once, display MAX indoor and outdoor temperatures, then press SET
to clear the MAX records (the display will be with “MAX” and “---.-“). It will auto
back to current temperature after 15 seconds or press UP twice.
4. Press UP twice, display MIN indoor and outdoor temperatures, then press SET
to clear the MIN records (the display will be with “MIN” and “---.-“). It will auto
back to current temperature after 15 seconds or press UP once.
Under normal mode, press DOWN or / to switch /
Note:
When the actual temperature is higher than working condition, HH.H will be displayed;
when actual temperature is lower than working condition, LL.L will be displayed.
