Bedienungsanleitung Orion OWP10UBT (Seite 2 von 2) (Englisch)

563035

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

SWITCHING ON

1. Spread the blanket out flat on the mattress ensuring there are no folds with the lower edge is at the

bottom of the bed and the power lead towards the head end. Then lay a sheet over it.

take care not to allow any folds or kinds to develop where mattress sections abut. Each time the blanket

is used please check that it is spread absolutely flat on the mattress. Then place a blanket or duvet on

top of the electric mattress heater and covering sheet to prevent loss of heat.

2. Push the flat plug of the blanket into the socket.

The blanket may only be used with 220-240 Volts a.c.

Switch on the blanket using the hand-operated switch.

3 = maximum warmth, warm-up time approx. 30 minutes. The indicator light will keep on and

won’t flash

2 = moderate warmth, the indicator light will flash

1 = minimum warmth, the indicator light will weak flash (setting 1 is recommended for all

night use.)

0 = OFF, the blanket is disconnected from the power supply.

The indicator light lights up during the heating phase: now you can experience the pleasant

warmth. After about 120 minutes the blanket silently switches off automatically.

ADDITIONAL NOTE:

The electronic components inside the switch may lead to a slight warming of the switch when the blanket is on.

Therefore the switch must not be covered or placed on top of the electric mattress heater when it is in

operation.

You should not reply on using your hands to gauge the blanket’s temperature because they are much les

sensitive to heat than the surface of the human body. A temperature, which may feel tepid to your hand, may

feel unpleasantly hot on your body.

The blanket must be covered by a duvet, for example, because otherwise there will be a high loss of heat and

the blanket cannot warm up properly.

Qualified persons using original replacement parts may only undertake repairs to the electric mattress heater.

Repairs carried out by unqualified persons may cause substantial risk to the user.

CLEANING AND CARE

The electric mattress heaters should be kept clean because it must not be laundered or dry-cleaned.

Small stains can be removed with a cloth or a damp sponge, perhaps using some mind liquid detergent.

Before cleaning the blanket, always remove the plug from the power socket. The blanket must not become

wet. If it gets damp it needs natural drying in the air.

Never switch on the blanket to dry it.

RETAIN FOR FUTURE USE

Examine the appliance frequently for signs of wear or damage. If there are such sign or if the appliance has been misused,

return it to the supplier prior to nay further use.

TECHNICAL DATA:

Model: ORION OWP10UBT

Size: 150 (L) * 140 (W) cm

Material: Polyester

Voltage: 220V-240V~ 50Hz

Watts: 60W max. for individual control

Net weight: 1,5kg

AC cord length: 2,6m

Color: white

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Orion OWP10UBT Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info