When used rearward facing, the child seat must be in the fully reclined position.
Pull lap and diagonal sections of the car seat belt until fully extended and feed both
through the space between the shell and the base. Fasten the seat belt.
Thread the lap section through the guides located at the front of the base (8).
Thread the diagonal strap through the two upper guides located on the back of the
seat shell (9).
Tighten the seat belt by pulling first on the lap section, then on the diagonal one (10).
Lock the diagonal section of the belt with the red lock-off clip. The lock-off should be
positionned against the buckle of the seat belt (11). Check that there are no kinks or
twists in the seat belt.
Always keep the seat in the most reclined position.
Forward facing use (9-18kg)
Fully recline the seat. Pull lap and diagonal sections of the car seat belt until fully
extended and feed both through the space between the shell and the base. Fasten the
seat belt (12).
Feed the waist strap of the seat belt through the guides located under the seat base of
the car seat (13).
Push the child seat right down into the car seat, and tighten both sections of the seat
belt by pulling the belt in the direction shown (14).
Lock the diagonal section of the belt with the red lock-off clip. The lock-off should be
positionned against the buckle of the seat belt (15).
Check that there are no kinks or twists in the seat belt.
Harness buckle
To fasten the harness, bring the two shoulder straps together (16) (17) and insert them
into the buckle; you should hear a “click” (18). To release the harness, press the buck-
le’s red button (19).
Fitting the harness
• To tighten the harness: Pull on the adjusting straps positioned on the harness. You
do not need to press on the adjuster buttons (20). IMPORTANT: A correctly adjusted
harness is essential for your child’s protection. There should not be more than finger’s
width between the harness and your child.
• To loosen the harness: Press on the adjuster buttons positioned on the upper section
of the harness, grasp the lower section and pull simultaneously (21).
Reclining your child seat
Push the adjustment lever located under the front of the seat upwards, then pull or
push the base towards or away from you (22).
Storage of the instruction manual
Store this instruction manual, depending on the model of your vehicle, either in the
pouch provided, or by slipping it into between the shell and the cover of the seat.
