812558
10
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
2.2 General Safety Instructions
INFORMATION
Read the service manual before starting work. Familiarise yourself with the product's functions before use. If you are
not familiar with the product, read the service manual before performing the inspection. If a service manual is not
available, request it from the manufacturer (see the overview of all Otto Bock branches "Otto Bock Worldwide"). You
can also download documents from our home page at www.ottobock.de or www.ottobock.com.
CAUTION
Wearing unsuitable work clothing
Risk of pinching, crushing, being pulled in
Wear suitable work clothing and, for example, gloves and protective eyewear as necessary when working on the
product.
CAUTION
Use of unsuitable tools
Risk of pinching/crushing or damage to the product.
When completing the tasks, only use tools that are suitable for the conditions at the place of work and for which
safety and the protection of health are assured with proper use.
NOTICE
Tipping or falling of the product
Risk of damage to the product
When you work on the product, secure it so that it cannot tip over or fall down.
Use a clamping fixture to secure the product whenever you work on it at a workbench.
NOTICE
Re-use of self-locking nuts
Unintended loosening of the screw connections
Always replace self-locking nuts with new self-locking nuts after disassembly.
INFORMATION
Many screw connections utilise screws and nuts equipped with thread lock. If you loosen screw connections, be sure
to replace the respective nut or screw with one having a new thread lock. If new screws or nuts with thread lock are
not available, apply a medium-strength liquid thread locker (such as Loctite 241® or Euro Lock A24.20) to the existing
screws.
INFORMATION
Clean and disinfect the wheelchair before commencing service work. Observe the applicable care instructions and
product-specific inspection instructions in the instructions for use.
3 Service Work
3.1 Instructions for Adjustment
The following section describes the replacement and retrofitting of standard and option parts on the CV / CS / CLT
wheelchairs.
10 02/2011
Service Work
Downloaded from www.Manualslib.com manuals search engine
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Otto Bock Avantgarde CV wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info