01 / 2010 C2000Page 178
Maintenance and Care
Fig.38 Removingthecasterwheel
9.3.2 DriveWheelReplacement
Proceed as follows:
1. Turn off the controls.
2.
Jack up the power wheelchair so that the wheel you want
to replace can rotate freely.
3.
Loosen the ve cap nuts and remove them along with the
washers and spring washers.
4. Pull the drive wheel to the front off the threaded bolts.
5. Put the new drive wheel onto the threaded bolts.
6. Put on the ve spring washers and ve washers.
7. Tighten all ve cap nuts with a torque wrench.
Properly reassemble all components upon completion of the
work.
INFORMATION
When installing the wheel, tighten all ve cap nuts to a torque
of 25Nm.
Fig.39 Disassemblingthedrivewheel
