28
Footrest Assemblies Mounted to the Seat Tube
Figure 19 Figure 20
Components of the Footrest Assemblies
The footrest assemblies consist of the following components:
- Footrest receiver (Fig. 19, item B)
- Footrest holder (Fig. 19, item C)
- Calf band (Fig. 19, item D)
- Footrest bar (Fig. 19, item E)
- Footplate (Fig. 19, item F)
Footrest Receivers
The different footrest assemblies are adjustable in their depth by pushing the footrest receiver more or less
deeply into the the seat tube which features a corresponding adjustment hole channel. For this purpose, loosen For this purpose, loosenFor this purpose, loosen
the Allen head screws (Fig. 19, item A) on both sides and move the footrest receiver to the desired position.
Then re-tighten the Allen head screws.
Footrest receivers with ratchet joints allow the footrests to elevate after opening the eccentric lever (Fig. 20,
item A). Choose an angle and lock the footrest by closing the eccentric lever. Choose an angle and lock the footrest by closing the eccentric lever.Choose an angle and lock the footrest by closing the eccentric lever.
Figure 21 Figure 22
Footrest Holder (Fig. 21)
The footrest holder is hung into the footrest receiver.
To remove the footrest, pull the lever to the rear and twist the footrest outwards.
Now you can remove the footrest by pulling it upwards.
Adjusting the Lower Leg Length (Fig. 22)
After loosening the screw (Fig. 22, item A) at the footrest holder, the footrest bar and footplate can be adjusted
to the required lower leg length and for the height of the seating shell you use.
Footrest bars are offered in short and in long version.
When making adjustments, always make sure that the footplate does not contact the caster.
A
A
E
D
B
C
F
A
