Bedienungsanleitung Outdoorchef AROSA (Seite 13 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

812290

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

OUTDOORCHEF.COM OUTDOORCHEF.COM

24 25

BEFORE FIRST USE

1. Clean all parts that come into contact with food.

2. Check all parts that carry gas, as described in the LEAK TEST section. Also do this if your AROSA 570 G was delivered pre-assembled by

the retailer.

3. Let the barbecue burn for about 20–25 minutes at the setting.

INSTRUCTIONS FOR LIGHTING

KETTLE

1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are ﬁrmly tightened (as described in

the LEAK TEST section).

2. Open the barbecue lid. CAUTION: Never ignite the barbecue when the lid is closed.

3. Open the gas supply at the gas bottle.

4. Press the gas regulating knob of the selected ring burner and turn it anticlockwise to the setting. Press the gas regulating

knoband hold it until the gas is burning.

5. If the gas does not ignite within 3 seconds, set the gas regulating knob to . Wait 2 minutes to allow the uncombusted gas to dissipate.

Then repeat step 4.

6. If it is not possible to light the barbecue after 3 attempts, look for the causes (as described in the TROUBLESHOOTING section).

SIDE COOKING PLATE APPLICABLE ONLY FOR MODELS WITH SIDE COOKING PLATE

1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are ﬁrmly tightened (as described in the

LEAK TEST section).

2. Open the lid of the side cooking plate. CAUTION: Never ignite the side cooking plate when the lid is closed.

3. Open the gas supply at the gas bottle.

4. Press the gas regulating knob for the side cooking plate and turn it anticlockwise to setting . Press the gas regulating knob and

hold it until the gas is burning.

5. If the gas does not ignite within 3 seconds, set the gas regulating knob to . Wait 2 minutes to allow the uncombusted gas to dissipate.

Then repeat step 4.

6. If it is not possible to light the burner for the side cooking plate after 3 attempts, look for the causes (as described in the

TROUBLESHOOTING section).

EXPLANATION OF THE SYMBOLS ON THE OPERATING CONSOLE

BURNER SYSTEMS

KETTLE

Barbecuing systems with two ring burners

The large ring burner achieves its highest power at the setting and its lowest power at the setting. It is designed for applications in

the medium to high temperature range.

The small ring burner achieves its highest power at the setting and its lowest power at the setting. It is designed for applications in

the medium to low temperature range.

SIDE COOKING PLATE APPLICABLE ONLY FOR MODELS WITH SIDE COOKING PLATE

Burner system for the additional side cooking plate

The burner achieves its highest power at the setting and its lowest power at the setting.

Heat settings/heat levels and Ignition

: off position

: low power

: medium power

: high power

: Ignition

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Outdoorchef AROSA Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Outdoorchef AROSA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info