Bedienungsanleitung Outdoorchef KENSINGTON 480 G (Seite 13 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

812323

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

OUTDOORCHEF.COM

BEFORE FIRST USE

1. Clean all parts that come into contact with foodstuffs.

2. Check all parts that carry gas, as described in the CHECKING FOR LEAKS chapter. Also do this if your gas kettle barbecue was delivered

already assembled by the retailer.

3. Let the barbecue burn for about 20–25 minutes at the setting.

INSTRUCTIONS FOR LIGHTING

1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are firmly tightened. (Follow the

instruction in the CHECKING FOR LEAKS chapter.)

NOTE: For the MINICHEF 420 G, the side shelves must be folded out the entire time the barbecue is in use.

2. Open the barbecue lid. CAUTION: Never light the barbecue when the lid is closed.

3. Open the gas supply at the gas bottle.

4 a. Models with one ring burner:

Press the gas regulating knob and turn it anticlockwise to the setting. Press the black ignition button and hold it until the spark

catches and the gas is burning. (Fig. 1C)

4 b. Models with two ring burners and a separate ignition button:

Press the gas regulating knob for the large ring burner and turn it anticlockwise to setting .

Press the black ignition button and hold it until the spark catches and the gas is burning.

Alternatively press the gas regulating knob for the small ring burner (left knob) and turn it anticlockwise to setting .

Press the black ignition button and hold it until the spark catches and the gas is burning. (Fig. 1D)

4 c. Models with two ring burners without a separate ignition button:

Press the gas regulating knob for the large ring burner and turn it anticlockwise to setting .

Press the gas regulating knob and hold it until the spark catches and the gas is burning. (Fig. 1E)

Alternatively press the gas regulating knob for the small ring burner (left knob) and turn it anticlockwise to setting .

Press the gas regulating knob and hold it until the spark catches and the gas is burning.

5. If the gas does not light within 3 seconds, set the gas regulating knob to . Wait 2 minutes to allow the uncombusted gas to dissipate. Then

repeat point 4.

6. If it is not possible to light the barbecue after 3 attempts, check the causes (as described in the TROUBLESHOOTING section).

INSTRUCTIONS FOR LIGHTING THE CITY 420 G

1. Make sure that all connections between the gas hose, the gas pressure regulator and the gas bottle are ﬁrmly tightened

(Follow the instruction in the CHECKING FOR LEAKS chapter).

2. Open the barbecue lid. CAUTION: Never light the barbecue when the lid is closed.

3. Open the gas supply at the gas bottle.

4. Press the gas regulating knob and turn it anticlockwise to the setting. Press the red ignition button several times until the gas

lights. (Fig. 1F)

5. If the gas does not light within 3 seconds, set the gas regulating knob to . Wait 2 minutes to allow the uncombusted gas to dissipate. Then

repeat point 4.

6. If it is not possible to light the barbecue after 3 attempts, look for the causes (as described in the TROUBLESHOOTING section).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Outdoorchef KENSINGTON 480 G Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Outdoorchef KENSINGTON 480 G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info