Bedienungsanleitung Packard Bell EasyNote DT (Seite 43 von 56) (Englisch)

469052

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Helpdesk - 43

You Cannot Connect to the Internet

1. Your account details have not been released yet.

a. After you have just performed your online subscription with an Internet Service Provider (ISP), it is recommended

that you restart your computer to complete the Internet setup process.

b. The first time you use your Internet connection, your account may not be accepted immediately. Certain ISPs

require a short setup period to process your account details. Please wait 30 minutes before you try to connect to

their services again.

2. You entered an incorrect user name and/or password.

a. Check your user ID and password. Re-type them if necessary.

b. Check exact spelling (upper and lower case, or any punctuation).

c. Check the login and setup information given to you by your ISP

3. The server you are trying to connect to is out of order.

Check with your ISP whether the service is available.

4. Your Internet settings (browser, email, or connection) may have been changed.

When you subscribe, your ISP usually provides connection details (user name, password, server phone number, email

address, etc.). Check these details and restore your Internet settings, following the procedure given by your ISP.

5. Your account with your Internet Service Provider has been terminated or your ISP server is unavailable.

Contact your ISP and check the access conditions to their Internet server.

6. You have moved and your dialling location has changed.

a. Change your settings by clicking on Start > Control Panel.

Change the View by: option to Large icons, then select Phone

and Modem.

b. Specify your new location and any special options for your phone

line.

c. Click on OK.

d. Change the View by: option back to Category when you have

finished.

7. You have used the Recovery Management program.

a. If your Internet access required you to install software, you should

reinstall this software.

You are using a dial-up modem (optional)

1. The modem may not be connected properly.

Check the modem cable connections between the computer and the telephone socket.

If your computer has a network port, make sure your modem cable is connected to your modem port and not to your

network port.

2. The telephone line may already be in use.

Free the telephone line before you dial a modem connection. You cannot phone and connect to the Internet at the same

time if both your telephone and your modem use the same line.

3. There is no dial tone

a. Disconnect your modem and plug in a telephone to check the integrity of your telephone line. If you can hear a

normal dialling tone on the phone, then your modem or cable may be defective.

b. Check that the dialling type is correctly set-up for your country. Click on Start > Control Panel. Change the

View by: option to Large icons, then select Phone and Modem. Make any changes to match your phone

configuration and click on OK to finish.

4. The modem is used by another program ("COM port in use" error message).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Packard Bell EasyNote DT Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Packard Bell EasyNote DT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info