543691
47
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
Helpdesk - 47
RECOVERING YOUR SYSTEM
If the troubleshooting steps (page 36) did not help fix your problem, you can run the Packard Bell Recovery Management
program. This will restore your computer to the same state as when you purchased it, while giving you an option to retain all
settings and personal data for later retrieval.
To recover your system
1. Create recovery discs as soon as you can.
You can use these discs later for recovering your system from significant hardware and software problems. For instructions,
see “Creating recovery discs” on page 18.
2. Perform minor fixes.
If only one or two items of software or hardware have stopped working correctly, the problem may be solved by reinstalling
the software or the device drivers. To recover software and drivers that were pre-installed at the factory, see “Recovering
pre-installed software and drivers” on page 47. For instructions on reinstalling software and drivers that were not pre-
installed, see that product’s documentation or technical support Web site.
3. Revert to a previous system condition.
If reinstalling software or drivers does not help, then the problem may be solved by returning your system to a previous
state when everything was working correctly. For instructions, see “Returning to a previous system conditionon page 48.
4. Reset your system to its factory condition.
If nothing else has solved the problem and you want to reset your system to factory condition, see “Returning your system
to its factory condition” on page 49.
Recovering pre-installed software and drivers
As a troubleshooting step, you may need to reinstall the software and device drivers that came pre-installed on your
computer from the factory. You can recover using either your hard drive or the backup discs you have created.
New software - If you need to recover software that did not come pre-installed on your computer, you need to follow that
softwares installation instructions.
New device drivers - If you need to recover device drivers that did not come pre-installed on your computer, follow the
instructions provided with the device.
To recover your pre-installed software and drivers:
1. Click on Start > All Programs > Packard Bell, then click on Packard Bell Recovery Management. Packard Bell
Recovery Management opens.
- OR -
If you are recovering from your driver and application recovery disc, insert it into the disc drive, then go to Step 3 after the
Packard Bell Application Recovery main menu opens.
2. Click on the Restore tab, then click Reinstall applications/drivers. The Packard Bell Application Recovery main menu
opens.
HELPDESK
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Packard Bell EasyNote TV43 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Packard Bell EasyNote TV43

Packard Bell EasyNote TV43 Bedienungsanleitung - Deutsch - 62 seiten

Packard Bell EasyNote TV43 Bedienungsanleitung - Holländisch - 122 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info