Bedienungsanleitung Packard Bell iPower (Seite 10 von 54) (Englisch)

469056

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

10 - Quick Start & Troubleshooting Guide

Disc Compatibility for Recordable Drives

•DVD±RW Writer

: DVD±RW drives (or DVD Dual drives) can write to recordable CDs, recordable DVDs ('-

' or '+').

• Double-Layer DVD-RW Writer:

Double-Layer DVD-RW drives (or DVD+R9 DL drives) can write to

recordable CDs and single- or double-layer recordable DVDs.

• Blu-ray Combo Drive

: Blu-ray Combo drives can write to recordable CDs, all 'standard' recordable DVDs

(but not 'HD' DVDs) and may read from (but not write to) Blu-ray discs.

• Blu-ray Writer

: Blu-ray drives can write to recordable CDs, all 'standard' recordable DVDs and recordable Blu-ray discs.

Precautions

✓ If a program needs a disc, insert the disc into the drive before you start the program.

✓ Do not force a disc into the drive; make sure the disc is correctly inserted, then close the disc tray.

✓ Do not eject the disc without first closing the program that is using the disc. This could potentially cause your computer to

stop responding. Should this happen, restart your computer by using the Windows Task Manager.

✓ If the tray does not eject, you may try to open it manually:

1. Switch your computer off.

2. Carefully insert a straightened paper clip into the emergency eject port (if

available). Do not use a pencil as the lead may break inside the eject port

and damage the drive.

✓ Keep the disc tray closed whenever you are not using the drive. Do not touch the optical lens in the drive, if the lens is

dirty, the optical drive may not function correctly.

✓ Do not wipe the lens with a normal cloth. Use a cotton swab to gently clean the lens.

✓ The optical drive is classified as a Class 1 laser product.

Note: This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home

and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

Ports and Connectors

The ports and connector types described below are commonly used on Packard Bell computers. However, this does not mean

that they are present on the computer you have purchased, nor that it is limited to these ports. To view documentation

specific to the model you have purchased, please check InfoCentre.

Precautions

✓ Before you attach any device, check the installation instructions that were supplied with it.

✓ Do not remove a device if the computer is using it.

✓ Most devices may be added or removed while the computer is on. They will be detected and installed automatically.

However, certain devices must be deactivated before they can be removed from the computer (for example, see Removing

a card from an External Card Reader on page 9).

Legacy Ports

PS/2 - Connect a mouse and keyboard to these connectors.

Caution: Unlike most connectors, you must turn off your computer before adding or removing a legacy-

device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Packard Bell iPower Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Packard Bell iPower

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info