Bedienungsanleitung Pacojet 2 (Seite 18 von 29) (Englisch)

660371

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Programming pacotizing tasksc)

Select the pacotizing mode on the control panel if this has not yet been

selected.

When the protective beaker is mounted correctly,

the pacotizing settings are displayed immediately.

The overpressure function is set by default for pa-

cotizing prior to start and can be deactivated as

requiredbyusingtheselectororarrowbuttonsfor

“normal pressure” before start.

As a further processing option, one may now continue with the default preset-

ting “pacotize the entire beaker” or one can select the amount of total and

decimal portions.

Pacotizingd)

When the START button has been pressed, the

PACOJET 2 will proceed through the chosen

processing cycle fully automatically. Upon comple-

tion of the processing cycle, the shaft and pacotiz-

ing blade return to the start position, the beaker

is depressurized automatically and the pacotizing

cycle ends.

IMPORTANT! Î

Never start the machine without having inserted a pacotizing beaker into the

protective outer beaker!

2.2

4.5

IMPORTANT! Î

Thefrozenfoodproductmustadherermlytothepacotizingbeakerduring

the pacotizing process. Furthermore, the beaker contents may not thaw prior

to pacotizing. In either case, the frozen product may dislodge itself from the

beaker inner surface during pacotizing and result in machine overload.

Take the protective outer beaker with an inserted

pacotizing beaker by its handle and place it on the

base plate of the machine. Push the protective

outer beaker back against the rounded back wall

of the base to centre it. The beaker handle should

be facing toward the right side of the machine and

perpendicular to it. Now raise the protective outer

beaker upward into position.

The top of the protective beaker must have ush

contact with the machine, so that the tabs of the

protectiveouterbeaker t snuglyintothe twist-t-

ting of the PACOJET 2. Now turn the beaker handle

clockwise, i.e.fromright to left-front, 90° until the

handle is perpendicular to the front. Done correctly,

the protective outer beaker will now be tightly and

evenly mounted in the PACOJET 2.

To avoid damage to the PACOJET 2 or injury to operators, the machine will

only function when the protective outer beaker is properly mounted in the

machine.

IMPORTANT! Î

Never mount the protective outer beaker into the PACOJET 2 with a paco-

tizingblade andsprayguardsimplyrestingonit,asin thiscase, sufcient

contact of the pacotizing blade to the magnetic end of the shaft cannot be se-

cured and the pacotizing blade may fall into the beaker. Starting the machine

under this condition can damage the pacotizing blade and the shaft.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pacojet 2 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pacojet 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info