78
ZEBRA
DETECT
(CAMERA)
Use this to set the brightness level at which
the zebra patterns are to be displayed.
80%, 85%, 90%, 95%, 100%, 105%
VIDEO OUT
OSD
(CAMERA)
(VCR)
Select the ON setting to output the
information displayed on the screen
together with the signals from the AV
IN/OUT jack.
ON, OFF
DATE/TIME
(CAMERA)
(VCR)
Use this to set whether to display the date
and/or time on the screen and on the
signals that are output from the AV IN/OUT
jack.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The date and time are displayed.
O If any setting other than OFF is selected,
the time and/or date are displayed for
the signals that are output from the AV
IN/OUT jack, regardless of the setting
selected for the VIDEO OUT OSD item.
LEVEL METER
(CAMERA)
(VCR)
Select ON to display the audio level meter
on the screen.
OFF, ON
DISPLAY
(CAMERA)
(VCR)
Use this to set the amount of information to
be displayed on the screen. (P67)
OFF, PARTIAL
, ALL
LCD
BACKLIGHT
(CAMERA)
(VCR)
Use this to adjust the backlight of the LCD
monitor.
When HI is selected, the backlight is made
brighter than usual.
HI, NORMAL
DISPLAY SETUP screen
CAMERA
DATA
(VCR)
With the ON setting, the camera settings
(vibration reduction, F-number, gain value
and white balance information) at the time
of shooting are displayed when the tape is
played back.
OFF, ON
<Note>
When a tape on which the unit’s camera
settings has been recorded is played back
on another unit, the camera settings may
not be displayed properly.
Menu configuration (cont.)
The underlining indicates the factory setting.
A. DUB INPUT
(VCR)
Use this to select the sound to be recorded
when performing audio dubbing.
MIC:
The sound of the internal microphone or
external microphone is recorded. (P58)
A_IN:
The sound of the audio unit connected to
the AV IN/OUT jack is recorded.
<Note>
If audio dubbing is performed on a
recording which was made in the 48K (16-
bit) audio mode, the sound heard during
shooting will be overwritten and the dubbed
sound recorded in its place.
DV OUT
(VCR)
Select the ON setting when converting
analog input signals into digital signals and
outputting them from the DV connector.
OFF, ON
AV IN/OUT SETUP screen
Item/
(Display
mode)
Description of settings
Item/
(Display
mode)
Description of settings
