Bedienungsanleitung Panasonic AG-DVX100A (Seite 63 von 72) (Englisch)

574347

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Playback

Normal playback

Set the POWER switch to ON, and press the

CAMERA/VCR button to switch to the VCR

mode.

Normal playback operations can be performed

using the OPERATION lever or accessory

wireless remote control unit.

Tape blank search

By pressing the EVF DTL/END SEARCH button

in the VCR mode, it is possible to search for

unrecorded parts on the tape or the part which

was shot last. For details, refer to the section

on the EVF DTL/END SEARCH button (page

11).

Index search

This function is used to search the index signals

recorded on the tape. An index search can be

performed using the accessory wireless remote

control unit.

ODuring tape playback, press the INDEX

button (9 or :) on the wireless remote

control unit.

“S1” appears in the viewfinder and on the

LCD monitor, and the search for the next

scene is started.

OTo stop the search at any time, press the

STOP ($) button.

OEach time the INDEX button is pressed after

the search operation has commenced, “S2”

“S3” are displayed, and the second or any

subsequent scene can be searched. When a

scene is located, playback commences from

that part of the tape. (Any scene up to the

ninth in the reverse or forward direction from

the present position of the tape can be

specified.)

The index search function may not operate

smoothly if any of the intervals between one

index and the next are less than one minute.

Variable speed search

This function changes the playback speed to

locate scenes.

OWhen the OPERATION lever is tilted in the 1

direction during tape playback, the variable

search mode is established, “1a” appears in

the viewfinder and on the LCD monitor, and

the tape is played back at the 1a speed. No

sound is played back at this time.

OThe playback speed changes when the

AUDIO MON/VAR button is pressed. Each

time the button is pressed, the playback

speed changes by one setting in the following

sequence: 1/5a (or 1/3a in the LP mode),

1a, 2a, 5a, 10a and 20a.

OThe speed is varied in the forward direction

using the “+” button; conversely it is varied in

the reverse direction using the “–” button.

OWhen the remote control is used, pressing

the VAR.SEARCH button establishes the

variable speed search mode, and the

playback direction and playback speed are

changed using the “V” and “B” buttons

among the SET buttons.

OTo return to normal playback, tilt the

OPERATION lever in the 1 direction.

PUSH-SET

∫

;

OPERATION lever

EVF DTL/END SEARCH button

Tape protection mode

When the camera recorder remains in the

playback pause or recording pause mode for

more than 5 minutes, it is automatically set to

the stop mode in order to protect the tape.

However, if it remains in the playback pause

mode when the temperature is low, the stop

mode may be established sooner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AG-DVX100A Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info