574346
78
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
78
Setup menu list (continued)
are the factory settings.
OTHER FUNCTIONS screen
Item/
(Display
mode)
Description of settings
POWER SAVE
(camera)
Select the power saving mode.
When you don’t perform any specified
operations for five minutes*
ON:
the camera recorder turns off
automatically.
OFF
:
the cylinder head pauses and
goes into standby mode without cutting
the power
.
*The camera recorder does not go into
power save mode if you use the follow-
ing controls.
•AUTO Button
• FOCUS switch
• PUSH AUTO button
• GAIN switch. WHITE BAL switch
• WHITE BAL switch
• IRIS button and dial
• CH1/CH2 SELECT switch
• INPUT1/2 switch
• AUDIO control
• OIS button
• SHUTTER button
• SPEED SEL button
• Zoom button and ring
• HANDLE ZOOM switch
• Opening or closing the LCD
HP MODE
(camera)
Select headphone output.
TAPE:
Sound recorded on the tape is
output.
LIVE:
Current input is output.
The beep sound is not output even if
you have selected ON for BEEP
SOUND. Use this when you are
shooting in the 24P mode or any
other time that sound delay becomes
noticeable.
USER FILE
(camera)
(VCR)
LOAD:
The previous scene file settings are
loaded.
SAVE:
The changed user file settings are
saved.
INITIAL:
The user file settings are returned to
the factory settings.
• After LOAD or INITIAL, switch
camera-recorder OFF and then back
ON to ensure that the settings take
effect.
FILE TRANS
(camera)
Make settings for scene file transfer.
(Page 47)
SCENE:
Transfer the scene file currently
selected with the SCENE dial.
SCENE ALL:
Transfer all scene files.
USER:
Transfer all user scene files.
Note
When in FILE TRANS mode, only
the menu operation buttons will
function.
FILE RECEIVE
(VCR)
Makes the camera ready to receive
scene files from another camera.
(Page 47)
Note
RECEIVE MODE appears on the screen after
you set this mode.
When in FILE RECEIVE mode, only
the menu operation buttons will
function.
HOUR METER
(camera)
(VCR)
Displays the total running time (a 5-
digit figure in 1-hour increments) of the
cylinder head.
Item/
(Display
mode)
Description of settings
78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic AG-DVX100B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info