Bedienungsanleitung Panasonic AG-HPX 300P (Seite 140 von 166) (Englisch)

597937

140

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

140

Chapter 8 Connecting to External Devices

Terminating USB mode

Use one of the following three methods.

• Set the camera POWER switch to OFF.

• Set the PC MODE option in the SYSTEM SETUP

screen to OFF.

• Press the USER button to which PC MODE has

been assigned.

USB host mode

This mode allows you to connect the camera to a hard

disk drive that supports USB 2.0 to save card data, view

thumbnails of the stored clips and write data back to P2

cards.

Switching to USB Host Mode

Set the menu option PC MODE SELECT in the

SYSTEM SETUP screen to USB HOST and set

PC MODE to ON.

• This engages the USB host mode.

• The USB LED on the camera lights in USB host

mode and USB HOST CONNECT appears in

the center of the viewﬁnder. When a normal

connection cannot be established with the hard

disk, the USB LED ﬂashes and DISCONNECT

appears in the viewﬁnder.

• When PC MODE is assigned to a user button,

press that user button to switch between USB host

mode and normal mode. However, a user button

cannot be used for switching in the thumbnail

mode.

For details, refer to [Assigning functions to USER

Buttons] (page 53).

Press the THUMBNAIL button.

• The thumbnail screen opens.

• Make sure that USB HOST appears at the bottom

right of the screen.

• When the camera is connected to a hard disk

drive, the HDD icon appears at the top right of

the screen. If the icon lights red this indicates that

data cannot be copied to or from the hard disk.

Check hard disk drive type.

For details on hard disk drives, refer to [Thumbnail

Screen] (page 102).

 NOTE

The USB host mode allows playback of P2 cards but

not recording of camera video or external input.

And clips on the hard disk must be written back to a P2

card before they can be played back.

For details, refer to [Writing back data to P2 cards]

(page 143).

Terminating USB host mode.

Use one of the following three methods.

• Set the camera POWER switch to OFF.

• Close the thumbnail screen and set the menu

option PC mode in the SYSTEM SETUP screen to

OFF.

• Press the USER button to which PC MODE has

been assigned.

*1 In thumbnail mode, pressing a user button will

not terminate USB host mode.

Using USB host mode

Supported hard disks

• A hard disk drive that supports the USB 2.0 interface

• P2 STORE (the optional AJ-PCS060G hard drive)

 NOTE

• This camera supports USB bus power (5.V, 0.5A) but some

hard disks may not be able to use USB bus power. Such hard

disk drives should be provided with a separate power supply.

• Do not connect a hard disk to hubs or other connections

that involve multiple units even if it is not powered on. Do

not connect other devices to the hard disk drive via a hub or

other device.

• This unit does not support hard disk drives that are 2 TB or

larger.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AG-HPX 300P Seite 140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info