Bedienungsanleitung Panasonic AG-HVX 200AP (Seite 35 von 138) (Englisch)

597941

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

Shooting

Native recording

1 Using the REC FORMAT (P2) function

(page 107) on the RECORDING SETUP

screen, select 720/30PN or 720/24PN as the

recording format.

2 Select the appropriate scene file using the

SCENE FILE dial.

If necessary, before doing this, perform the

camera settings from the setting menu, and

3 Using the OPERATION TYPE function (page

101) on the SCENE FILE screen, select FILM

CAM, and set the desired recording frame

rate using the FRAME RATE function (page

101).

4 Press the START/STOP button to start or

stop native recording in VFR mode.

• No signals are output from the 1394 terminal

during recording or recording standby in the

native mode.

• Sound is not recorded. However, sound will be

recorded when the same frame rate is used

for both recording and playback.

• When a recorded clip lasting a long time

is to be played back and imported using

a nonlinear editing system that supports

Varicams, the UB MODE option on the

RECORDING SETUP screen must be set to

FRM.RATE.

• If the effective frame information is to be

carried over when recording onto this camera-

recorder from a nonlinear editing system that

supports Varicams, the 1394 UB REGEN

option on the RECORDING SETUP screen

must be set to ON.

• After editing, materials are output from the

nonlinear editing system in 1080i/24P or

720P/60P (24P over 60P) format.

Standard recording

1 Using the REC FORMAT (P2) function (page

107) on the RECORDING SETUP screen,

select 720P/60P, 720P/30P or 720P/24P as

the recording format.

2 Select the appropriate scene file using the

SCENE FILE dial.

If necessary, before doing this, perform the

camera settings from the setting menu, and

3 Using the OPERATION TYPE function (page

101) on the SCENE FILE screen, select FILM

CAM, and set the desired recording frame

rate using the FRAME RATE function (page

101).

When 720P/30P or 720P/24P has been

selected as the recording format, the following

displays appear depending on the setting which

has been selected for the FRAME RATE item

on the SCENE FILE screen.

1) PULL DOWN information displayed in

PROPERTY-CLIP PROPERTY-VIDEO

With the default setting: 2:2 or 2:3

With any other settings: other

2) Format information in the bottom left of the

screen when thumbnails are displayed

With the default setting: 720P/30P or 720P/24P

With any other settings: 720P/60P

(The “default” setting is 30FRAME if the

frame rate of the recording format is 30P or

24FRAME if it is 24P.)

4 Press the START/STOP button to start or

stop standard recording in VFR mode.

• Sound is recorded.

• In the case of a nonlinear editing system that

supports Varicams equipped with an effective

frame extraction function, you can upload

even undercrank or overcrank shooting

materials as is. (The UB MODE option on the

RECORDING SETUP screen must be set to

FRM.RATE.)

• After editing, materials are output from the

nonlinear editing system in 1080i/24P or

720P/60P (24P over 60P) format.

• The 24P format is used for 2:3 pull-down

recording; the 30P format is used for 2:2 pull-

down recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AG-HVX 200AP Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info