Bedienungsanleitung Panasonic AJ-HDC27HP (Seite 7 von 140) (Englisch)

99989

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Features of the VTR unit

Digital system

The pictures are compressed by a component digital

recording system that uses the latest compression

technology while non-compression PCM recording

featuring excellent signal-to-noise ratio, frequency

band, waveform characteristics and reproduction of

detailed areas is employed for the sound. The result

is an even higher picture and sound quality.

Power saving management (SAVE REC) function

When the VTR unit is used for recording, the playback

system circuitry can be shut down, making it possible

to perform operations with a lower power

consumption.

Scene-to-scene continuity

Simply by pressing the VTR START button or lens

VTR button, continuity between the scenes is

obtained at a precision of 0 to +1 frame.

Rec review function

The last 2 to 10 seconds of a recording are

automatically rewound and played back to enable the

user to quickly check what has been recorded.

Playback function

This function enables the playback picture (in black

and white) to be viewed on the viewfinder screen.

Color playback pictures can be output from the HD

SDI MON connector.

Built-in time code generator/reader

The same or separate time code information can be

recorded on the dedicated sub-code track and video

AUX area, and played back.

External locking of time code

The built-in time code generator can be locked to an

external generator. A lithium battery is used as the

backup power supply of the built-in time code

generator to back up the memory data for about a

year even when no power is supplied to the unit.

Tape management information

As the tape management information, this unit

automatically saves the frame rate information on the

shooting speeds, the active frame information on the

first frame where the frame image was switched, and

the active frame count information in the user bits of

the sub-code track area (which used to be the LTC

area).

Built-in DOLBY NR system

The cue audio recording circuitry contains a Dolby B

noise reduction circuit.

Audio functions

O A phantom power supply type of microphone

(optional accessory) with sharp directivity

characteristics can be attached. It can also be

detached from the unit for use as an interview

microphone.

O Other kinds of microphones can also be connected

and, using the model AJ-MH800G microphone

holder (optional accessory), attached to the unit.

NEWS REC function

This function especially supports shooting in the

context of news gathering or documentary filming to

ensure that no opportune shutter opportunities are

passed up.

In other words, by controlling the start key

acknowledgment time, the unit can continuously

record without the user having to interrupt the

recording: this safeguards against the failure to record

those precious moments—a failure that occurs when

recording is resumed after it has been shut down

temporarily.

RETAKE function

This function is for not leaving behind superfluous cuts

when a cut turns out to be no good during the

shooting of news, reports or art programs.

Users should remember to handle this function very

carefully.

If there is enough leeway in the shooting time and a

particular cut is clearly judged to be no good, the tape

is rewound to the start of the cut concerned and the

rec pause (rec standby) mode is established by

operating the MODE CHECK button and lens RET

button. Since recording is now commenced from that

point on the tape, the no-good cut will be deleted. In

order to prevent the cut prior to the no-good cut from

being deleted, a part of the no-good cut equivalent to

ten or so frames is left behind.

By cutting down on the time taken for copying onto the

work tape, for instance, this function is very effective

in achieving economical operation.

INTERVAL REC function

This function makes simple interval shooting possible.

It proves to be very effective when shooting programs

with a nature theme or art programs.

Features (continued)

O “DOLBY” and the double-D symbol Î are trademarks of Dolby Laboratories Licensing Corporation.

O Other names of companies and products are trademarks or registered trademarks of the respective

companies.

01. 英(表1-25) 05.5.18 10:38 ページ7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDC27HP Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info