Bedienungsanleitung Panasonic AJ-HDC27HP (Seite 14 von 140) (Englisch)

99989

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

2 Synchro scan adjustment switches

These switches become effective when the shutter

switch 7 is set to ON and SYNCHRO SCAN 1 is

selected (The messages “SS:1¢¢.¢deg” appear

on the viewfinder screen). They are used to adjust

the synchro scan speed.

When the “–” switch is pressed, the shutter speed is

reduced; conversely, when the “+” switch is

pressed, it is increased.

During personal computer monitor shooting, etc.

adjust these switches to the positions where the

horizontal bar noise inside the viewfinder is

decreased.

3 WHITE BAL (white balance memory selector)

switch

PRST

: The TUNGSTEN (3200 K) white balance

value is stored in the memory.

This can be changed to DAY LIGHT (5600

K).

A or B

: When the AUTO W/B BAL switch 6 is set to

AWB, the white balance is automatically

adjusted to match the setting position of the

CC FILTER control 1, and the adjustment

value is stored in memory A or memory B.

When the CC FILTER control and the WHITE BAL

switch are set to the same positions as they were

when adjustment was performed, the adjustment

value stored in the memory is recalled, and the unit

is automatically adjusted to the white balance that

corresponds to this value.

If this switch setting is changed while the menu

display mode is set to “3” (default setting), the new

setting will appear at the WHITE BAL switch display

position on the viewfinder screen.

(Example: “A”)

Shooting (recording)/playback

function section (1)

1 CC FILTER/ND FILTER (filter selector) control

This is used to select the filter to match the light

source which is illuminating the subject. If the

control setting is changed while the menu display

mode is set to “3” (default setting), the new setting

will appear at the setting change message display

area of the viewfinder screen.

OThe two types shown above are provided for filter

combinations.

$ Control settings and filter selection

Parts and their functions (continued)

$ Examples of filter selection

Shooting conditions

CC filter

Sunrise, sunset, inside a studio

B (3200 K)

ND filter

1 (CLEAR)

Outdoors under a clear sky

C (4300 K) or

D (6300 K)

2 (1/4 ND) or

3 (1/16 ND)

Outdoors under cloudy or rainy

skies

D (6300 K)

1 (CLEAR) or

2 (1/4 ND)

Snowscapes, high mountains,

seashores or other perfectly clear

scenery

C (4300 K) or

D (6300 K)

3 (1/16 ND) or

4 (1/64 ND)

CC FILTER control (large

diameter) setting

CC filter selection

Cross filter

3200 K

4300 K

6300 K

ND FILTER control (small

diameter) setting

ND filter selection

CLEAR (Transparent)

1/4 ND

1/16 ND

1/64 ND

<Note>

The color temperatures shown above are those when the

LIGHTING item is set to TUNGSTEN or the D5600K item is set to

OFF on the CAMERA SETTING screen of FILM (CAM) MAIN

MENU 1.

01. 英(表1-25) 05.5.18 10:38 ページ14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDC27HP Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info