Bedienungsanleitung Panasonic AJ-HDX900 (Seite 12 von 134) (Englisch)

99987

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

2-2 Audio function section (input system)

;

1 MIC IN (microphone input) jack (XLR, 5-pin)

Connect the microphone (optional accessory) here. The

power for the microphone is supplied from this jack.

<Note>

Components of 150 Hz are removed from the signals

input from this connector.

2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2

recording level adjustment) controls

When the AUDIO SELECT CH1/CH2 switch 3 is set to

MAN, the recording level of audio channels 1 and 2 can

be adjusted using these controls.

The controls come with a locking mechanism. Therefore,

to adjust the recording level, simultaneously push in and

turn the controls.

3 AUDIO SELECT CH1/CH2 (audio channel 1 & 2

automatic/manual level adjustment selector) switch

This is used to select the method for adjusting the

recording levels of audio channels 1 and 2.

AUTO : Set here for automatic adjustment.

MAN : Set here for manual adjustment.

4 AUDIO IN (audio input selector) switch

These are used to select the input signals to be recorded

on audio channels 1 and 2.

FRONT :

The input signals supplied from the microphone which

has been connected to the MIC IN jack 1 are

recorded.

W.L. (wireless) :

The input signals from the slot-in wireless microphone

receiver are recorded.

REAR :

The audio input signals supplied from the audio

component which has been connected to the AUDIO IN

CH1/CH2 connectors 5 are recorded.

<Note>

When you use stereo microphone (AJ-MC900G optional),

set both CH1 and CH2 to [FRONT]. The signal from L CH

is recorded to CH1 and that from R CH to CH2.

5 AUDIO IN CH1/CH2 (audio input channel 1 & 2)

connectors (XLR, 3-pin)

An audio component or microphones are connected here.

This unit does not support AES/EBU signals.

6 LINE/MIC/+48V (line input/mic input/mic input + 48V)

selector switch

This is used to switch the audio input signals from the

audio component which has been connected to the

AUDIO IN CH1/CH2 connectors 5.

LINE : The audio input signals from the audio component

serving as the line input are selected.

MIC : The audio input signals from the internal power

supply type of microphone are selected. (The

phantom mic power is not supplied from the unit.)

+48V : The audio input signals from the external power

supply type of microphone are selected. (The

phantom mic power is supplied from the unit.)

7 Wireless receiver slot

The UniSlot wireless receiver (optional accessory) can be

attached here.

8 FRONT AUDIO LEVEL (audio recording level

adjustment) control

This enables the recording level of audio channels 1 and

2 to be adjusted.

However, when the AUDIO SELECT switch is set to the

AUTO position, the audio recording level is automatically

adjusted.

When the <MIC/AUDIO1> screen is opened from the VTR

MENU page by performing a menu operation, whether to

enable or disable the operation of this level control can be

set using the FRONT VR CH1 and FRONT VR CH2

setting items.

Chapter 2 Parts and their functions

(continued)

01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDX900 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info