Bedienungsanleitung Panasonic AJ-HDX900 (Seite 37 von 134) (Englisch)

99987

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

For the detailed audio-related settings, open the

<MIC/AUDIO1> and <MIC/AUDIO2> screens from the VTR

MENU page and select the settings for the items by

performing menu operations.

For details, refer to “Chapter 7 Menu description tables.”

4-4-2 Adjusting the audio signal recording

levels

The procedure for manually adjusting the levels at which the

signals are to be recorded on audio tracks CH1 and CH2 is

set forth below.

Set the MONITOR SELECT switch to the CH1/2 position

so that the audio level meter display in the display

window indicates CH1 and CH2, and check that 1 and 2

are actually indicated as the display in the display

window. Before proceeding any further, on the menu,

set whether to activate the F.AUDIO LEVEL controls

which are used for attenuation. (At the factory, the mode

in which these controls are inactive is established.)

Set the AUDIO SELECT CH1 and CH2 buttons to MAN

(manual).

While monitoring the audio level meter in the display

window or the audio level meter display inside the

viewfinder, adjust the AUDIO LEVEL CH1 and CH2

controls. If the uppermost bar (0 dB) is exceeded, the

“OVER” display lights up to indicate that the input

volume is too high. The level must be adjusted so that 0

dB will not be indicated even under maximum volume

conditions.

< MIC/AUDIO2 >

FRONT MIC POWER :ON

REAR MIC POWER :ON

MONITOR SELECT :STEREO

FRONT MIC LEVEL :–40dB

REAR MIC CH1 LVL :–60dB

REAR MIC CH2 LVL :–60dB

REAR LINE IN LVL :0dB

AUDIO OUT LVL :0dB

HEADROOM :18dB

WIRELESS WARN :OFF

< MIC/AUDIO1 >

FRONT VR CH1 :OFF

FRONT VR CH2 :OFF

MIC LOWCUT CH1 :OFF

MIC LOWCUT CH2 :OFF

MIC LOWCUT CH3 :OFF

MIC LOWCUT CH4 :OFF

LIMITER CH1 :OFF

LIMITER CH2 :OFF

AUTO LEVEL CH3 :ON

AUTO LEVEL CH4 :ON

CUE REC SELECT :CH1

TEST TONE :NORMAL

For the audio levels to be adjusted by one person only, it is

recommended that the F.AUDIO LEVEL controls be used.

Select in advance the audio channels whose levels are to be

adjusted, and while monitoring the level meter on the

viewfinder screen, adjust the F.AUDIO LEVEL controls in

such a way that the input will not be too high.

CTL

TAPE

Y minM

frm

VTCG

TIME DATE

P-iREC

SLAVE HOLD GPS

BATT

OVER

-dB

NDF

F:1----

R:2---- ---+

∫

Audio level meter in display window

Audio level meter display inside viewfinder

AUDIO LEVEL

CH1, CH2 controls

AUDIO SELECT

CH1, CH2 buttons

MONITOR SELECT

CH1/2OCH3/4 switch

MONITOR

CH1/3OSTOCH2/4

selector switch

Display window

4-4 Selecting the audio input signals

and adjusting their recording

levels

When the AUDIO SELECT CH1/CH2 switch is set to AUTO,

the recording levels on audio tracks CH1 and CH2 are

adjusted automatically. On the other hand, when it is set to

MAN, the levels can be adjusted manually. The recording

levels on audio tracks CH3 and CH4 can be selected using

the menu.

4-4-1 Selecting the audio input signals

Use the AUDIO IN switch to select the input signals to be

recorded on audio tracks CH1, CH2, CH3 and CH4.

For details, refer to “2-2 Audio function section.”

Chapter 4 Adjustments and settings for recording

(continued)

01.AJ-HDX900_P_E(VQT0X86)_E 06.6.28 10:16 AM ページ37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDX900 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info