99987
42
Zoom out
Zoom in
Vorherige Seite
1/134
Nächste Seite
42
Chapter 4 Adjustments and settings for recording
(continued)
4-5-2 Setting the internal clocks date and
time
1
Set the DISPLAY switch to UB.
2
Press the HOLD button to cause DATE to be displayed
in the display window.
4
Set the date (year/month/day) using the SHIFT button,
UP (+) button and DOWN () button.
5
Press the HOLD button to cause TIME to be displayed in
the display window.
6
Set the time (hour/minutes/seconds) using the SHIFT
button, UP (+) button and DOWN () button.
3
Set the TCG switch to SET.
7
Set the TCG switch to F-RUN or R-RUN. The internal
clock starts marking time as soon as the switch position
is changed.
8
Press the HOLD button to cause TIME ZONE (difference
from the world standard time) to be displayed in the
display window.
10
Set the time difference (hour/minutes) and whether it is
ahead (no display) or behind (“–” display) the world
standard time using the UP (+) button or DOWN ()
button.
Example: When the time difference is 5 hours behind
(New York)
Set 05:00 –”.
The time zone is always stored along with the date and
time in the memory as memo data. While referring to
the table on the right, set whatever applies to the local
time.
9
Set the TCG switch to SET.
Time difference
Region
Time difference
Region
00:00
Greenwich
00:30
01:00
Azores
01:30
02:00
Mid-Atlantic
02:30
New Foundland
03:00
Buenos Aires
03:30
04:00
Halifax
04:30
05:00
New York
05:30
06:00
Chicago
06:30
07:00
Denver
07:30
08:00
Los Angeles
08:30
Marquesas Islands
09:00
Alaska
09:30
10:00
Hawaii
10:30
11:00
Midway Island
11:30
+ 12:00
New Zealand
+ 09:30
Darwin
12:00
Kwajalein
+ 11:30
Norfork Island
+ 13:00 + 10:30
Lord Howe Island
+ 09:00
Tokyo
+ 06:30
Rangoon
+ 11:00
Solomon Islands
+ 08:30
+ 10:00
Guam
+ 07:30
+ 06:00
Dhaka
+ 03:30
Tehran
+ 08:00
Beijing
+ 05:30
Bombay
+ 07:00
Bangkok
+ 04:30
Kabul
+ 03:00
Moscow
+ 00:30
+ 05:00
Islamabad
+ 02:30
+ 04:00
Abu Dhabi
+ 01:30
+ 01:00
Central Europe
+ 02:00
Eastern Europe
+ 12:45
Chatham Island
11
Set the TCG switch to F-RUN or R-RUN to fix the time
zone.
<Notes>
After the date has been set in step 4, the internal clock
starts marking the time as soon as the switch position has
been changed even when the TCG switch is set to F-RUN
or R-RUN.
To cancel the setting in the course of setting the date, time
or time zone, set the TCG switch to F-RUN or R-RUN while
holding down the SHIFT button.
The clock is accurate to a monthly error of approximately
+/ 30 seconds in the power OFF status. If a more
accurate time reading is required, check the time and set it
again when the power is turned on.
If the date or time display has deviated from the local time,
the time zone setting may be off. Check the time zone
setting again. (There is no need to set the date and time
again.)
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ42
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic AJ-HDX900 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info