99987
47
Zoom out
Zoom in
Vorherige Seite
1/134
Nächste Seite
47
4
< UMID SET/INFO >
--OWNER--
COUNTRY :***
ORGANIZATION :****
#
USER :****
**DEVICE NODE**
When switching the power from the battery to an
external power supply while the time code is
externally locked
In order to ensure the continuity of the time code generators
power, connect the external power supply to the DC IN
socket, and then remove the battery pack. If the battery
pack is removed first, no guarantees can be made for the
continuity of the external locking of the time code.
Gen-locking of the camera unit while the time code
is externally locked
While the time code is externally locked, the camera unit is
gen-locked by the reference video signal which is supplied to
the GENLOCK IN connector.
<Notes>
O When the signal from the units HD SDI connector is to be
used as the reference video signal, first set the OUTPUT
SEL switch on the side panel to the CAM position.
O It takes time to synchronize GEN LOCK. Please do not
record or do any other operations until synchronization is
finished (approx. 10 sec.).
4-5-5
Setting the UMID information
This unit supports metadata UMIDs. As the UMID data, the
user must first set the name of his or her country (with 3 or
fewer characters), the name of the company or organization
(with 4 or fewer characters), and the user name (with 4 or
fewer characters). Input the name of the country based on
the Country Codes
(21)
stipulated under the ISO 3166
standard.
Given here as an example is the procedure for inputting the
user name.
21 Examples:
CHN for China, USA for United States, CAN for Canada, and JPN for
Japan
1
Open the <UMID SET/INFO> screen from the VTR
menu page by performing a menu operation.
2
Turn the JOG dial button to move the arrow (cursor) to
the USER item.
7
When the JOG dial button is pressed, the arrow (cursor)
returns to the USER item.
8
Press the MENU button to exit the menu operations.
5
Press the JOG dial button to enter the character.
6
Turn the JOG dial button to set the following characters.
4
Press the JOG dial button again and turn it until the
character to be set is displayed.
When the button is turned, the character displayed is
switched in the following sequence:
Space:
7
letters: AZ
7
numbers: 09
7
symbols: , >, <, /,
<Note>
Only spaces and letters can be selected for the
COUNTRY item. This does not apply to other items.
3
Press the JOG dial button to switch the screen to the
character entry mode.
Chapter 4 Adjustments and settings for recording
(continued)
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ47
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic AJ-HDX900 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info