Bedienungsanleitung Panasonic AJ-HDX900 (Seite 50 von 134) (Englisch)

99987

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

4-7-2 Viewfinder screen status display

configuration

All the items that can be displayed are laid out inside the

viewfinder as shown in the figure below.

4-7-3 Selecting the viewfinder screen

display items

To select which items are to be displayed on the viewfinder

screen, perform menu operations to open the <VF

INDICATOR1> screen or <VF INDICATOR2> screen from

the VF page, and select ON or OFF for the display or select

the type desired for each item concerned.

For details on operation, refer to “4-6-2 Basic menu

operations.”

< VF INDICATOR1 >

EXTENDER :ON

SHUTTER :ON

FILTER :ON

WHITE :ON

GAIN :ON

IRIS :S+IRIS

CAMERA ID :BAR

ID POSITION :UPPER L

DATE/TIME :OFF

ZOOM LVL :ON

COLOR TEMP :ON

SYSTEM MODE :ON

CAMERA MODE :ON

< VF INDICATOR2 >

TAPE :ON

BATTERY :ON

AUDIO LVL :ON

TC :OFF

VTR WARNING :NORMAL

SAVE LED :SAVE

For details, refer to the following pages.

4-7 Viewfinder screen status

displays

Not only the images but the lamps and characters indicating

the unit’s settings and operation statuses as well as the

messages, center and safety zone markers, camera ID and

other information are displayed inside the viewfinder.

4-7-1 Viewfinder lamp displays

Viewfinder pictured here is the AJ-

HVF21G.

(For details concerning viewfinder,

refer to the operating instructions

of each viewfinder.)

1 TALLY/REC (recording) lamp

This lights up (red) during recording. It flashes when a

problem has occurred. For details, refer to the

appropriate section in “6-3 Warning system.”

2 (abnormal operating status warning) lamp

This lights when the unit is set to an abnormal operating

status for any of the items set to “ON” on the “!LED”

screen of the setting menu.

For details on selecting the items which are to be

indicated with the lamp, refer to the <!LED> screen

items in “Chapter 7 Menu description tables.”

3 BATT (battery) lamp

This starts flashing when the battery voltage has dropped

to the level where the battery will no longer be usable in

several minutes’ time, and it lights when the battery is no

longer usable. To prevent operation from being

interrupted, replace the battery before it has discharged

completely. For details, refer to the appropriate section in

“6-3 Warning system.”

4 SAVE (VTR power-saving) lamp

This lights when the VTR SAVE/STBY switch is set to

SAVE. It goes off during recording.

<Note>

In the rec-pause mode, the SAVE mode is established

automatically, and the lamp lights after the time set for the

pause timer (temporary stop time) has elapsed.

After two minutes in the play-pause mode, the SAVE

mode is established automatically, and the lamp lights.

TALLY / REC

BATT

SAVE

432

Chapter 4 Adjustments and settings for recording

(continued)

/34min DIONIC90

-- GAIN -- -- USER SW GAIN --

LOW : 0 S.GAIN:30/36

MID :12

HIGH:18 DS.GAIN: 6 /10 /12

/15 /20

UM:S.GAIN 30

U1:AUDIO CH1 U2:DS.GAIN 12

REC WARNING COMP

TCG 00:00:00:00 iREC

3.2K 12 M F:1---- ---+ BS 23h59m

1A A 18

F:2---- ---+ ++F5.6 Z99

∫

24PA 3

249.8 ∑10min REC14.6V

1080 DRS

;

? B E F GH IA@

5 6

01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ50

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDX900 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info